Specifications

Token Ring Token Ring Configuration View
Device Management Page 72 SmartSwitch 9000/9500 Series
Token Ring Security
Configuration View
Access: From the Token Ring Configuration views, click the
Ring Security button.
This view provides information on the security
configuration for the ring.
Ring Name
The ASCII name assigned to this ring. This name
defaults to Network n, where n is a unique integer
value.
Ring Number
The number of the attached ring. If SPECTRUM
cannot determine the number of the ring, a zero
is returned.
Ring Status
The operational state of the ring.
Ring Speed
The speed of the ring, which can have a value of 4
or 16 megabits.
Administration State
Table 23 displays the valid administration states.
Total Allowed Stations
The total number of stations in the Allowed
Stations list.
Allowed Station Address Table
This section of the Token Ring Security
Configuration View contains a list of addresses
and interface numbers for the stations allowed on
the ring. The active monitor for the ring is
indicated by an asterisk (*) beside the address.
Double-clicking a table entry opens the Modify
Allowed Station List View (Page 85). This table has
the following buttons.
Table 23: Administration States
State Description
EnabledWithAlarm Generates an alarm upon
insertion of an illegal station
into the ring.
EnabledWithRemoveAnd
Alarm
Generates an alarm and also
removes the illegal station
from the ring.
Disabled Turns off security.