Specifications

Token Ring Token Ring Station Table View
Device Management Page 73 SmartSwitch 9000/9500 Series
Allows you to update the contents of the Station
Address Table.
Affects the display of the station addresses,
toggling the format between MAC (Physical) and
Canonical. The button displays the format not
currently selected.
Allows you to set a filter affecting the stations
displayed in the table. You select an attribute to
filter against by clicking one of the column
heading buttons.
Allows you to sort the stations displayed in the
table. You select an attribute to sort on by
clicking one of the column heading buttons.
Opens the Modify Allowed Station List View
(Page 85).
Token Ring Station Table View
Access: From the Icon Subviews menu of the CsTRApp,
select Stations.
This view displays a Station Table containing
information for all stations directly connected to
the ring. It also displays buttons which
manipulate the information in the table, and
buttons to access other views.
Ring Name
The ASCII name assigned to this ring. This name
defaults to Network n, where n is a unique integer
value.
Ring Number
The number of the attached ring. If SPECTRUM
cannot determine the number of the ring, a zero
is returned.
Ring Speed
The speed of the ring, which can have a value of 4
or 16 megabits.
Ring Status
The operational state of the ring.
Active Monitor
The MAC address of the active monitor for the
ring. This address will appear in any tables with
an asterisk (*) to identify it.
Update
MAC/Canonical
Set/Clear Filter
Sort Up/Sort Down/Un-Sort
Modify Allowed Station List