Specifications

Token Ring Token Ring Station Table View
Device Management Page 75 SmartSwitch 9000/9500 Series
Opens the Token Ring Station Detail View
(Page 80).
Opens the Station Alarms Dialog Box (Page 82).
Allows you to remove the selected station from the
ring.
Token Ring Station Isolating
Errors View
Access: Click the Isolating Errors Table button in the
Token Ring Station Table view.
This view displays an Isolating Errors Table
containing information for all stations directly
connected to the ring.
This view provides the following information:
Ring Name
The ASCII name assigned to this ring. This name
defaults to Network n, where n is a unique integer
value.
Ring Number
The number of the attached ring. If SPECTRUM
cannot determine the number of the ring, a zero
is returned.
Ring Speed
The speed of the ring, which can have a value of 4
or 16 megabits.
Ring Status
The operational state of the ring.
Active Monitor
The MAC address of the active monitor for the
ring. This address appears in all tables with an
asterisk (*) to identify it.
Station Address
The MAC address of the station to which this
information pertains.
Station Name
The ASCII name assigned to this station.
Line
The number of line errors that this station has
detected on the ring.
Burst
The number of burst errors that this station has
detected on the ring.
Station Detail
Station Alarms
Remove Station