Specifications

Token Ring Token Ring Station Table View
Device Management Page 83 SmartSwitch 9000/9500 Series
Station
The address of the current station. You can enter
the address of a valid station in this field to make
it the current station.
Alarm
The threshold alarms that can be manipulated.
The alarms in this column include: Line,
Internal, Burst, A/C, and Congestion.
Threshold
The current setting for each corresponding alarm
threshold. You can change the values by selecting
the field and editing the number.
State
The state of each corresponding alarm threshold.
Valid values are: Enable or Disable.
Stations
The MAC addresses of all stations in the ring at
the time the dialog box was opened except the
current station, which is displayed in the Apply
Settings to list. Double-clicking on an address in
this list moves it to the Apply Settings to list.
Apply Settings to
The MAC addresses of all stations to which the
threshold settings may be applied. This list
always contains the current station’s MAC
address upon opening the dialog box. Double-
clicking on an address in this list moves it to the
Stations list.
Moves the selected item from the Stations list to
the Apply Settings to list.
Moves the selected item from the Apply Settings
to list to the Stations list.
Moves all of the stations from the Stations list to
the Apply Settings to list. The current station
remains at the top of the Apply Settings to list if
it is a valid station.
Moves all of the stations from the Apply Settings
to list to the Stations list. The current station
remains at the top of the Apply Settings to list if
it is a valid station.
Applies the threshold settings to the stations
listed in the Apply Settings to list or the station
entered into the Station field if the list is empty.
>
<
>>
<<
Apply