Specifications

ATM ATM Client Application Configuration View
Device Management Page 92 SmartSwitch 9000/9500 Series
ATM Client Application
Configuration View
Access: Highlight the ATM Application Icon, and from the
Icon Subviews, select ATM Configuration.
This view provides configuration information on
the ATM Client Application.
Configuration Table
Max VPCs (Virtual Path Connections)
The maximum number of VPCs supported at this
ATM interface. At the UNI (User Network
Interface), the maximum number of VPCs ranges
from 0 to 256.
Max VCCs (Virtual Channel Connections)
The maximum number of VCCs supported at this
ATM interface.
Conf VPCs
The number of VPCs configured for use at this
ATM interface. At the UNI, the configured number
of VPCs ranges from 0 to 256.
Conf VCCs
The number of VCCs configured for use at this
ATM interface.
Max VPI (Virtual Path Identifier) Bits
The maximum number of active VPI bits
configured for use at this ATM interface. At the
UNI, the maximum number of active VPI bits
configured for use ranges from 0 to 8.
Max VCI (Virtual Channel Identifier) Bits
The maximum number of active VCI bits
configured for use at this ATM interface.
ILMI (Interim Local Management Interface) VPI
The VPI value of the VCC supporting the ILMI at
this ATM interface. If the values of both ILMI VPI
and ILMI VCI equal 0, then the ILMI is not
supported.
ILMI VCI
The VCI value of the VCC supporting the ILMI at
this ATM interface. If the values of both ILMI VPI
and ILMI VCI equal 0, then the ILMI is not
supported for this ATM interface.
Address Type
The type of primary ATM address configured for
use at this ATM interface.
Admin Address
The address assigned for administrative
purposes.