Specifications

ATM ATM Interface Detail View
Device Management Page 93 SmartSwitch 9000/9500 Series
Neighbor Address
The IP address of the neighbor system at the far
end of this interface to which a Network
Management Station can access network
management information.
Neighbor If Name
The name of the interface on the neighbor system
at the far end of this interface, to which this
interface connects. If the neighbor system is
manageable through SNMP and supports the
object ifName, the value of this object must be
identical to that of the ifName for the ifEntry of
the lowest level physical interface for this port. If
this interface does not have a name, the value of
this object is a zero length string.
ATM Interface Detail View
Access: From the Icon Subviews menu for the ATM
Interface Icon, select Detail.
This view displays cell performance breakdown
information for ATM as shown in Figure 25.
Received
The number of cells received by the switch.
Transmitted
The number of cells transmitted by the switch.
HEC Errors
The number of Header Error Control Errors.
Total
The total number of cells.
Figure 25: ATM Interface Detail View
Cell Breakdown
Total
Delta
HEC Errors
Transmitted
Received
Total
Accum
value
value
value
value
0.00%
0.00%
0.00%
Clear
Chart sections
comparing received
and transmitted
values.
Names and
values of
models being
compared.
Background
colors match
chart sections
Current values
(will vary
depending on
mode selected).
Percent of total
pie.
Mode selection
buttons.