Specifications

ATM SFCS System Configuration View
Device Management Page 94 SmartSwitch 9000/9500 Series
SFCS System Configuration
View
Access: From the Icon Subviews for a SFCS Device icon,
select SFCS System > Configuration.
This view contains information used to set up and
configure each Virtual Switch. It contains the
following information:
Admin Status
Sets the administrative state of the Secure Fast
Cell Switching (SFCS) services for this virtual
switch. This controls the SFCS state at a chassis
level. Regardless of the per-interface state of each
SFCS switching element and the state of active
connections, writing the value disabled causes
the entire switch to immediately shutdown.
Oper Status
The current operating condition of this switch.
Possible values are described in Table 28.
Oper Time
The amount of time that this switch system has
been in its current operational state.
Last Change
The last time a change was made to the
configuration entry for this switch.
Switch Capacity
The maximum capacity of the switch in
megabytes.
Max Cnx Entries
The maximum number of connections which can
be established on this switch.
Table 28: Operating Status Values
Value Description
enabled Running.
disabled Not running.
pending-disable Shut-down in progress.
pending-enable Start-up in progress.
invalid-config Not running, invalid configuration.
other None of the above.