Specifications

ATM Module Configuration Table View
Device Management Page 97 SmartSwitch 9000/9500 Series
Module Configuration Table
View
Access: From the Icon Subviews for a SFCS Device icon,
select SFCS Module > Configuration.
This table contains the configuration and
administrative information for each SFCS
module. It provides the following:
Slot
The primary index to the SFCS switch table. This
identifies the chassis slot number for this switch
module.
Admin Status
Sets the administrative state of the SFCS
switching services for this SFCS module. This
controls the SFCS state at a module level.
Oper Status
The current operating condition of the SFCS
module.
Oper Time
The amount of time that this SFCS module has
been in its current operational state.
Last Change
The last time a change was made to the
configuration entry for this SFCS switch module.
SFCS MIB Version
The current version, expressed as an integer, of
the SFCS MIB for this switch module.
SFCS MIB Rev
The current revision level of the Cabletron SFCS
MIB for this switch module.
Switch Host Port
The switch port that is attached to the host.
Host Ctrl ATM Address
The ATM address of the host.
Switch Capacity
The maximum bandwidth based on the current
configuration of the switch module.
Max Cnx Entries
The maximum number of connections which can
be established on this switch module.
Max Stat Entries
The maximum number of stats enabled VCs for
this switch module.
Max UPC Entries
The maximum number of UPC enabled VCs for
this switch module.