Specifications

ManualsBrandsCabletron Systems ManualsIndoor Fireplace9F106-01

SPECTRUM Enterprise Manager

Device Management

SmartSwitch ™ 9000/9500 Series

Management Module Guide

Summary of content (145 pages)

PAGE 1
SPECTRUM Enterprise Manager Device Management SmartSwitch ™ 9000/9500 Series Management Module Guide
PAGE 2
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Notice Restricted Rights Notice Cabletron Systems reserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Cabletron Systems to determine whether any such changes have been made. The hardware, firmware, or software described in this manual is subject to change without notice.
PAGE 3
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Contents SMARTSWITCH 9000/9500 SERIES Overview .........................................................................7 Module Descriptions ....................................................9 ATM Access Modules ..............................................9 Ethernet MicroLAN Switch Modules ........................9 Ethernet SmartSwitch INB Modules.......................10 Ethernet SmartSwitch INB 2 Modules....................
PAGE 4
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Chassis Module Icon Subviews Menu Selections .....41 Application Label Icon Subviews Menu Selections ...42 Interface Label Icon Subviews Menu Selections .......42 Repeater Labels.....................................................42 FDDI Ring Label ....................................................43 FDDI Ring Label Icon Subviews Menu Selections ....43 FDDI Port Labels ...................................................
PAGE 5
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Token Ring Station Isolating Errors View .................... 82 Interface Statistics Table View................................... 111 Token Ring Station Non-Isolating Errors View............. 85 Connection Configuration Table View........................ 112 Token Ring Station Alarm Thresholds View ................ 87 Connection Statistics Table ....................................... 114 Token Ring Station Detail View ......................
PAGE 6
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Placing the Chassis Location Icon in the Location View 132 Modeling the Modules in the Chassis......................133 Quick Steps .............................................................133 Modeling the Flexible Network Bus (FNB) ..................134 Modeling the Modules Connected to the INB .............134 Modeling the Modules Connected to the FNB ............
PAGE 7
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series SmartSwitch 9000/9500 Series This section describes the Chassis and Modules that makeup the SmartSwitch 9000/9500 Series. Overview Figure 1: The SmartSwitch 9000/9500 (Figure 1) consists of a chassis that can support up to 14 modules, an Evironmental module, a Flexible Network Bus, a high speed Internal Network Bus, and over 30 different types of modules.
PAGE 8
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series The SmartSwitch 9000 utilizes a packet- and cellswitching backplane to transfer information throughout your network. Figure 2 shows a representation of the relationship between the front panel interfaces and the backplane for each module installed in the SmartSwitch 9000 chassis.
PAGE 9
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Module Descriptions Ethernet MicroLAN Switch Modules The following modules are available for the SmartSwitch 9000 Series: The Ethernet MicroLAN Switch Module is a four channel Ethernet to FDDI bridge. Up to three front panel Ethernet networks can be connected to this module. These networks can be bridged to any other Ethernet or FDDI segment, and to any other MMAC-Plus card via the FNB bus.
PAGE 10
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Ethernet SmartSwitch INB Modules Ethernet SmartSwitch INB 2 Modules The Ethernet SmartSwitch INB Modules are 24port and 36-port Ethernet switching modules that provide 24 or 36 Ethernet networks with connectivity to the SmartSwitch 9000 Internal Network Bus (INB 2). They feature 24 or 36 10Base-T front panel ports supported by RJ-71 style connectors.
PAGE 11
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Fast Ethernet INB Modules • The 9H423_28 is a single module offering connectivity for 24 switched Ethernet segments and up to four switched Fast Ethernet connections. It supports media flexibility for both Fiber Optic Fast Ethernet backbone and Twisted Pair server/workstation connections.
PAGE 12
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series FDDI Switch Module FDDI Repeater Modules The FDDI Switch Module (9F116-01) is a two-port FDDI bridge used to connect an external FDDI network with one of the two FDDI networks, Flexible Network Bus (FNB) 1 or FNB 2; or to connect between FNB 1 and FNB 2 on the FNB backplane.
PAGE 13
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series TR MicroLAN Switch Modules Token Ring SmartSwitch Module The 9T122-08 and 9T122-24 TR MicroLAN Switch Modules provide connectivity to two Token Ring networks through the Fiber Distributed Data Interface (FDDI) backplane in the chassis. The TR MicroLAN Switch Module’s single 24-port Token Ring, or two 12-port Token Rings use standard RJ-45 connectors supporting either Unshielded Twisted Pair (UTP) or Shielded Twisted Pair (STP) lobe wiring.
PAGE 14
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series SmartCell Switches Carrier Module The 9A656-04 SmartCell switch module is a single-slot, hot-swappable modules for the SmartSwitch 9000. Each module provides 4.5 Gbps of ATM Switching fabric with 64K cell output buffers that provide priority queuing and the ability to communicate with other SmartSwitch 9A656-04 modules via a unique Cell Transfer Matrix (CTM) backplane.
PAGE 15
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series SPECTRUM Model Types This sections desctribes the Model Types used by SPECTRUM to manage and monitor the device. Table 1 lists the Model Types representing the SmartSwitch 9000 Series devices and dysplays the Device icons used to represent each.
PAGE 16
SPECTRUM Enterprise Manager Table 1: Device SmartSwitch 9000/9500 Series SPECTRUM Model Types (Continued) Model Type 9E423-36 Ethernet SmartSwitch Module 9E423-36 9E428-12/30 Ethernet SmartSwitch Module 9E428-12/30 9E429-12/36 Ethernet SmartSwitch Module 9E428-12/36 9H423-28 SmartSwitch 10/100 Module 9H423-28 9H421-12 Fast Ethernet SmartSwitch Module 9H421-12 9H422-12 Fast Ethernet SmartSwitch Module 9H422-12 9H429-12 Fast Ethernet SmartSwitch Module 9H429-12 9H423-26 SmartSwitch 10/100 Mo
PAGE 17
SPECTRUM Enterprise Manager Table 1: SmartSwitch 9000/9500 Series SPECTRUM Model Types (Continued) Device Model Type 9T122-08 MicroLAN Switch Extension Module 9T122-08 9T122-24 MicroLAN Switch Module 9T122-24 9T125-08 MicroLAN Switch Module 9T125-08 9T125-24 MicroLAN Switch Extension Module 9T125-24 9T425-16 Token Ring SmartSwitch Module 9T425-16 9F106-02 Repeater Module-External FNB 9F106-02 9F116-01 FDDI Switch Module 9F116-01 9F120-08 MicroLAN Concentrator 9F120-08 9F125-08 MicroLAN
PAGE 18
SPECTRUM Enterprise Manager Table 1: Device SmartSwitch 9000/9500 Series SPECTRUM Model Types (Continued) Model Type 9A000 Switch Module 9A000 9A128-01 Access Module-FNB 9A128-01 9A426-01 Access Module-FNB and INB 9A426-01 9A426-02 Access Module-FNB and INB 9A426-02 9A656-04 SmartCell Switch 9A656-04 Example Device Icon Model Name 9A128-01 Model Name SFSmartCell 18 of 145 Model Name 9A128-01 Model Name SFSmartCell
PAGE 19
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Views for the Device Icon This section provides brief descriptions of the views that are accessible from the double-click zones and Icon Subviews menu for the Device Icon. Application View Figure 3: This view (Figure 3) displays icons that represent the applications supported by this device.
PAGE 20
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Configuration Views Container View These views (Figure 4) display configuration and operating information specific to this device. They are accessible from the Device icon in the case of the Device Configuration view, or from other icons used to represent the device, its ports or interfaces, and applications. These views and their location within SPECTRUM are described under Icon Subviews (page 55).
PAGE 21
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Module View Figure 6: This view (Figure 6) is accessible from the Chassis icon only. It displays Location view icons for each module installed in the chassis. Rows list the slot, model type, network address, and community string. • To display the Location view icon for a specific model listed in the Module view, double-click on that row. • To search the list in the Module view for a specific Module Type, select Filter...
PAGE 22
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Device Views These views display icons and labels that represent the device, its ports or interfaces, and applications. They are described under SPECTRUM Views within the Device Management documentation.
PAGE 23
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Environmental Module Information The COM 1, COM 2, and the EPIM fields provide additional information for the connections on the Environmental Module. The LCD field provides information on the module performance. Figure 7 shows the relationship between the Device view and the corresponding front panel of the Environmental Module of the SmartSwitch 9000 chassis. Note: Note: The four fields shown in Figure 7 do not function at this time.
PAGE 24
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Figure 7: Environmental Module Chassis Device View Primary Landscape 0x00400000 *FileViewOptions Net Addr Model Name Sys Up Time Contact Manufacturer Description Device Type Location Serial Number COM 2: COM 1: EPIM: LCD: Status FNB 1: FNB 2: INB 1: INB 2: COM ports 1 and 2 are RS-232 serial ports providing out-of-band management.
PAGE 25
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Backplane Status This area of the Device view provides the status of the chassis backplane. Figure 8 shows the backplane status information fields as displayed in the Device view. Note: Note: The fields described below do not function at this time. A future version of firmware will include this functionality. Figure 8: Backplane Status FNB 1/FNB 2 The Flexible Network Bus (FNB) is one of the components of the chassis backplane.
PAGE 26
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Chassis Device View This view (Figure 9) displays the Module Icon that represents the Physical Devices and their placement in the chassis. These icons are described under the Chassis Module Icon (page 36).
PAGE 27
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Backplane Device View Figure 10: This view (Figure 10) shows a logical representation of the backplane connections (FNB, INB and SMB) for each of the modules installed in the chassis. To access this view, select View > Page > Backplane from one of the following Device views: Chassis, Environmental, or Physical.The icons, their double-click zones, and Icon Subviews menu selections are described under Backplane Module Icon (page 46).
PAGE 28
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Environmental Device View This view displays the temperature in Fahrenheit or Celsius (selectable from the Options menu) and power levels for the devices installed in the chassis. Figure 11 shows an example of an Environmental Device view. To access the Environmental view, select View > Page > Environmental from one of the following Device views: Chassis, Backplane, or Physical.
PAGE 29
SPECTRUM Enterprise Manager - - SmartSwitch 9000/9500 Series Redundant - indicates that power from the secondary power source is being used for the chassis. NON-Redundant - indicates that power from the primary power source is being used for the chassis. • Main Pwr Bus - displays the voltage of the chassis’ main power bus. The value can range between 40 and 60 volts DC. - Green - power normal - Yellow - over current, over voltage, or under voltage • Diag Pwr Bus - field does not function at this time.
PAGE 30
SPECTRUM Enterprise Manager Figure 11: SmartSwitch 9000/9500 Series Example Environmental Device View Physical Device View This view (Figure 12) provides a static image of the chassis, ports, and modules installed in the chassis.
PAGE 31
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Interface Device View Figure 13: This view displays Icons (Figure 13) that represent the interfaces of the modules installed in the chassis. This view also displays the device icon and Interface Options Panel described in SPECTRUM Views. The icons, their double-click zones, and Icon Subviews menu selections are described under Interface Icon (page 50).
PAGE 32
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Device Topology View Figure 14: This view (Figure 14) displays icons that represent the device, its ports or interfaces, and the devices and LAN networks that contain those devices connected to its ports. It is described in SPECTRUM Views. The Interface icons displayed in this view are the same as those in the Interface Device view. These icons are described under Icons (page 36).
PAGE 33
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Model Information View Performance View This view (Figure 15) displays information about this device and allows you to set thresholds and alarm severity. The Model Information view may vary depending on the model it defines. For a general description of a Model Information view refer to SPECTRUM Views within the Device Management documentation.
PAGE 34
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series SPECTRUM View Access Figure 17: The views listed above are accessed through double-click zones on icons and from Icon Subviews menus for the particular icon displayed. The double-click zones and Icon Subviews menus available from an icon and its labels described in this document are presented as shown in Figure 17. A callout identifying a label is displayed and listed with the view accessed by the double-click zone.
PAGE 35
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Management Tasks Monitor Interface or Port Operation • ATM Client Application Configuration View (page 70) • ATM Interface Detail View (page 72) • Ethernet Interface Status Label (page 36) • Repeater Port Status Label (page 42) • FDDI Port Status Label (page 44) • Token Ring Port Status Label (page 45) • SMB 1 and SMB 10 Icons (page 47) • FNB 1 and FNB 2 Icons (page 49) • INB 1 and INB 2 Icons (page 49) Upgrade Firmware for the Device Setting Repe
PAGE 36
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Icons This section describes the icons used to represent the modules, ports, and applications for the SmartSwitch 9000 Series devices in SPECTRUM. Chassis Module Icon This icon displays a logical representation of the physical module, its location in the chassis, and its front panel interfaces or ports. Figure 18 through Figure 22 show examples of Chassis Module icons for the SmartSwitch 9000.
PAGE 37
SPECTRUM Enterprise Manager Figure 18: SmartSwitch 9000/9500 Series Example Ethernet Chassis Module Icon Module Identification Labels 8 9E132-15 Model Name Bridging Repeater Labels Repeater Port Labels Port Number Label Port Status Label Packet Rate Label fnb e1 e2 e3 Slot Number Model Type Model Name Application Access Label FWD FWD FWD Interface Labels FWD Interface Type and Number Interface Status E1 UNLOCKED E2 UNLOCKED E3 UNLOCKED 1 ON Pkts 4 2 ON Pkts 4 3 ON Pkts 4 37 of 145 8 9
PAGE 38
SPECTRUM Enterprise Manager Figure 19: SmartSwitch 9000/9500 Series Example FDDI Chassis Module Icon Module Identification Labels 8 9F120-08 Model Name FDDI 1 FDDI Port Labels Port Number Label Port Status Label 1 2 3 4 5 6 7 8 9 10 11 12 ACT 8 9F426-02 CON CON Bridging Interface Labels Interface Type and Number Interface Status CON CON FDDI Ring Labels CON (with Ring Number) CON CON FDDI Port Labels CON Ring Identification Label Port Status Label CON CON CON i2 FWD f1 FWD f2 FW
PAGE 39
SPECTRUM Enterprise Manager Figure 20: SmartSwitch 9000/9500 Series Example Token Ring Chassis Module Icon Module Identification Labels 8 9T122-08 Model Name Bridging Slot Number Model Type Model Name Token Ring Label Icon Subviews Menu Selections (page 45) FWD f2 FWD T1 16M T2 16M 1 ENB Frms 0 2 ENB Frms 0 3 ENB Frms 0 4 ENB Frms 0 RI RO ACT ACT 9T122-24 Model Name Application Access Label fnb FWD f1 8 Chassis Module Icon Subviews Menu Selections (page Interface Labels Interface Type
PAGE 40
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Figure 21: Example ATM Chassis Module Icon Module Identification Labels 8 Slot Number Model Type Model Name 9A128-01 Model Name Bridging Application Access Label fnb atm Interface Labels FWD FWD Chassis Module Icon Subviews Menu Selections (page 41) Application Label Icon Subviews Menu Selections Interface Type Interface Status Interface Label Icon Subviews Menu Selections (page 42) 40 of 145
PAGE 41
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Chassis Module Icon Subviews Menu Selections Table 2: Table 2 lists each of the Icon Subviews menu selections specific to the Chassis Module for each device within the SmartSwitch 9000 chassis. The Application view, Model Information view, and Interface Device View are described in SPECTRUM Views. A summary and example for each view is provided under Views for the Device Icon (page 19).
PAGE 42
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Application Label Icon Subviews Menu Selections Interface Label Icon Subviews Menu Selections Table 3 lists the module-specific Icon Subviews menu selections available for the Bridging Application Label described in Bridging Applications. Table 4 describes each of the device-specific Icon Subviews menu selections available for the Interface Label.
PAGE 43
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Frame Rate Label The frame traffic rate over this port. FDDI Ring Label Icon Subviews Menu Selections Table 5: Table 6 describes each of the device-specific Icon Subviews menu selections available for the FDDI Ring Label. Color Repeater Port Status and Conditions Values and Colors Status Description Green ON Port is operational. Blue OFF Port is off. Yellow TST Port is in the test mode.
PAGE 44
SPECTRUM Enterprise Manager Port Number Label Identifies the port on the ring. Ring Identification Label Identifies the ring this port is connected to (A or B). SmartSwitch 9000/9500 Series FDDI Port Label Icon Subviews Menu Selections Table 8 describes each of the device-specific Icon Subviews menu selections available for the FDDI Port Label. Port Status Label Displays the status of this port. Table 7 lists the possible states and corresponding colors.
PAGE 45
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Token Ring Label Icon Subviews Menu Selections view for the selected ring. This view allows you to set the desired ring speed. Table 9 describes each of the device-specific Icon Subviews menu selections available for the Token Ring Label. Token Ring Port Labels Table 9: Token Ring Icon Subviews Menu Menu Selection Port Number Label Identifies the port on the ring. Description Configuration Opens the Token Ring Configuration View (page 73).
PAGE 46
SPECTRUM Enterprise Manager Table 10: SmartSwitch 9000/9500 Series Token Ring Port Icon Subviews Menu Selections Port Status Condition Values and Colors Condition Color INIT (Initial) Gray ENB (Enabled) Yellow BYP (Bypassed) Blue DIS (Disabled) Blue INS (Inserted) Green ACT (Active) Green WRP (Wrapped) Red Table 11 describes the Icon Subviews menu selections available for Token Ring ports.
PAGE 47
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Module Identification Labels Table 12: SMB 1 and SMB 10 Status Descriptions (Continued) These labels display the following information: Slot Number Label The location of the module within the chassis. Model Type Label The type of network interface module in the chassis slot. Color Status Grey --- The interface could not be found for this module. Red --- Problems have occurred reading and determining the status of the interface.
PAGE 48
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Figure 22: Example Backplane Module Icon Module Identification Labels Slot Number Model Type Model Name 8 9A656-04 Model Name SMB 1 ON SMB 1 and SMB 10 Icons SMB 10 ON Backplane Connection Status Label FNB 1 --B --- A FNB 1 and FNB 2 Icons FNB 2 A B ----- INB 1 --INB 2 --- INB 1 and INB 2 Icons 48 of 145
PAGE 49
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series FNB 1 and FNB 2 Icons The Flexible Network Bus (FNB) icons (Figure 22) represent the connections between the module and the FNB 1 and FNB 2. Table 13 describes the possible operational states. Table 13: Color Status Blue --- FNB 1 and FNB 2 Status Descriptions Description The module is not connected to the FNB but has the potential to be connected. Blue DIS The module is disabled.
PAGE 50
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Interface Icon This section describes the network interface module icons. Figure 23 provides an example of the network interface module icon and displays its labels/double-click zones. Figure 23: Interface Icon Interface Icon Subviews Menu Selections (page 52) ATM Interface (a) (b) 3.
PAGE 51
SPECTRUM Enterprise Manager Table 16: Color SmartSwitch 9000/9500 Series Network Information Label The Network Information label displays a userselectable network information field. You can select the field to display (Network Address, Name, or Subnet Mask) using the interface options panel. The default field is the Network Address. Double-click this label to access the Secondary Address Panel described in the SPECTRUM Views documentation.
PAGE 52
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Interface Icon Subviews Menu Selections Table 18 describes each of the Icon Subviews menu selections available for the interface icon. Table 18: Interface Icon Subviews Menu Selections Menu Selection Description Protocols (ATM Interface Only) Opens the ATM Client Application Configuration View (page 70) or Performance view. Detail (SFSmartCell Only) Opens the ATM Interface Detail View (page 72).
PAGE 53
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Application Icon Figure 24: These icons (Figure 24) represent the devicespecific applications, common applications and optional applications supported by these devices. Table 19 lists the menu selections available from the Icon Subviews menu for device-specific applications. (Refer to the SPECTRUM Views documentation for information on the Performance, Device Topology and Model Information views.
PAGE 54
SPECTRUM Enterprise Manager Table 19: Device-Specific Applications Application Chassis Manager (MMACChasApp) MMACPlus Token Ring (MPlusTRApp) SmartSwitch 9000/9500 Series Table 20: Menu Selections/Views Component Table - Opens the Component Table view. This view is an SPMA view. Refer to the SPMA documentation for information about this view. Stations - Opens theToken Ring Station Table View (page 80). Station Errors - Opens theToken Ring Station Isolating Errors View (page 82).
PAGE 55
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Icon Subviews This chapter provides general descriptions of the Configuration and application-specific views that display MIB information for the SmartSwitche 9000 Series. These views are accessible from the Application icons or Application labels displayed on the Device view icons.
PAGE 56
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Device Configuration View This view (accessed from the Device icon) provides the following information and operating status: Contact Status This field indicates if a connection with the device has been established. Component Table This button provides access to the Community Names view. This is an SPMA view. For information on using the Community Name view, refer to the SPECTRUM Portable Management Application Tools Guide.
PAGE 57
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Port Configuration - CSIIf Port View This view displays port-specific information for this device. Access this view from the Icon Subviews menu for the Chassis Module Icon (page 36) and Interface Icon (page 50). Interface Index The numerical value identifying the port. Interface Type The type of interface for the port (FDDI). Operation Status The current operating state of the port. Possible values are On, Off, or Test.
PAGE 58
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series FddiMAC Device Configuration View This view provides information on the configuration and operating status of the concentrator. Access this view using one of the following methods: • Highlight the FddiMAC Application Icon (page 53) and from the Icon Subviews menu select Configuration. • Highlight the FDDI Ring Label (page 43) in the Chassis Device view and from the Icon Subviews menu select FDDI Configuration.
PAGE 59
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series SMT Information This section of the FddiMAC Device Configuration view provides the following configuration information on the FDDI SMT: SMT Version The version of Station Management (SMT) running. OBS Present Indicates whether an Optical Bypass Switch (OBS) is connected. T-Notify (sec) The timer value, in seconds, used in Neighbor Notification Protocol. The allowed range is from 2 to 30 seconds.
PAGE 60
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Table 21: Ring States FDDI Ring States Description Isolated The concentrator is not attached to the ring. Non-Op The concentrator is attempting to enter the ring. Ring-Op The ring is operational. Detect The claim/beacon process of the FDDI ring protocol has exceeded 1 second. This indicates a potential problem. Non-Op-Dup The ring failed to complete the claim/beacon process because a duplicate FDDI address has been detected.
PAGE 61
SPECTRUM Enterprise Manager Table 22: Ring States SmartSwitch 9000/9500 Series SMT MAC Configurations Description Isolated The path is not inserted into any path. Local_A The A port is inserted into a local path and the B port is not. Local_B The B port is inserted into a local path and the A port is not. Local_AB Both A and B are inserted into a local path. Local_S The S port is inserted into a local path. Wrap_A The secondary path is wrapped to the A port.
PAGE 62
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series FDDI Port Configuration View This view provides information on the configuration and operating status of the ports. To access this view, highlight the FDDI Port Labels (page 43) in the Chassis Device view and select Port Configuration from the Icon Subviews menu.
PAGE 63
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series connectors or the cable between this port and the node. Link Error Rate Cutoff The link error rate threshold at which a link connection is flagged as faulty and the port disabled by SMT. The default link error rate cutoff threshold is 7, which represents 12.5 bit errors per second. Figure 25: Link Estimate Table Bit Errors per Second Link Error Rate Alarm The link error rate threshold that, if exceeded, generates an alarm for the port.
PAGE 64
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Repeater Configuration View This view provides information on the configuration and operating status of the network the repeater is monitoring. To access the Repeater Configuration view, do the following: • Within the Application view, highlight the MMACPlusRptr Application Icon (page 53). From the Icon Subviews menu, select Configuration. • Within the Chassis Device view, highlight the Repeater Labels (page 42).
PAGE 65
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Source Address Management This area of the Repeater Configuration view indicates the timeout period, in seconds. Ageing Interval The time, in seconds, that dynamically learned forwarding information remains in the database before being selected. Trap Configuration This area of the Repeater Configuration view allows you to enable or disable any of the following types of traps.
PAGE 66
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Alarm Configuration This area of the Repeater Configuration view provides configuration information on generating alarms for the selected module. The configuration information is as follows: Timebase This field allows you to set the alarm timebase. The timebase is the number of seconds used as the interval for performing all of the rate alarm checks. The minimum is 10 seconds.
PAGE 67
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Error Source This area of the Repeater Configuration view provides a series of buttons allowing you to select the types of errors to include in the error sum. The selectable error types are as follows: CRC The number of packets received by the module with bad Cyclical Redundancy Checks (CRCs). Giants The number of giant packets received by the module. A giant packet exceeds 1518 bytes (not including preamble).
PAGE 68
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Fddi Station List View This view displays the configuration of the FDDI ring, basic information about the devices in the ring, and FDDI network. You can access this view from the Icon Subviews menu for the FddiMAC Application Icon (page 53) or the FDDI Ring Label (page 43) in the Chassis Device View. Update, Print, Sort and Find Use these buttons to perfom the functions listed to the contents of the Station Table.
PAGE 69
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series FDDI Stats View The FDDI Stats view displays the bandwidth statistics of the FDDI ring and basic information about the devices on the ring and FDDI network. To access this view, highlight the Fddi MAC Application Icon (page 53) (Icon Mode), or text label (List Mode) and select Bandwidth Util from the Icon Subviews menu. Fddi Frames (Frm/Sec) Provides the number of FDDI frames per second for the device.
PAGE 70
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series ATM Client Application Configuration View This view provides configuration information on the ATM Client Application. To access this configuration view, highlight the ATM Interface Icon (page 50) and from the Icon Subviews menu select Protocols -> ATMClientApp -> Configuration. Configuration Table Max VPCs (Virtual Path Connections) Indicates the maximum number of VPCs supported at this ATM interface.
PAGE 71
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series ILMI VCI Indicates the VCI value of the VCC supporting the ILMI at this ATM interface. If the values of both ILMI VPI and ILMI VCI equal 0, then the ILMI is no supported for this ATM interface. Address Type Indicates the type of primary ATM address configured for use at this ATM interface. Admin Address Indicates the address assigned for administrative purposes.
PAGE 72
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series ATM Interface Detail View This view displays cell performance breakdown information for ATM as shown in Figure 26. To access this view, select Detail from the Icon Subviews menu for the ATM Interface Icon (page 50). Received Displays the number of cells received by the switch. Figure 26: Transmitted Displays the number of cells transmitted by the switch. Names and values of models being compared.
PAGE 73
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Token Ring Configuration View This view provides information on the configuration of the Token Ring application. Access the Token Ring Configuration view in one of the following ways: • Within the Application view, highlight the MPlusTRAPP Application Icon (page 53) and select Configuration from the Icon Subviews menu. Ring Name Displays the ASCII name assigned to this ring. This name defaults to Network n, where n is a unique integer value.
PAGE 74
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Port Configuration This section of the Token Ring Configuration view provides the following information : Station Ports ON Out Of Defines the total number of enabled station ports on the addressed module. Ring Ports ON Out Of Displays the total number of enabled ring in/ring out ports in this port group. Enable All Station Ports Enable All Ring Ports Allows you to enable all the station ports in this port group by setting the value to Enable.
PAGE 75
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Host Error Status This box in the Host Configuration section of the Token Ring Configuration view provides a series of read-only indicator buttons detailing the last error status returned by the Device.
PAGE 76
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series TR Ring Configuration View This view provides configuration information on the ring the ports are attached to. To access this view, click the Ring Configuration (page 73) button in the Token Ring Configuration View (page 73). Ring Configuration This section of the TR Ring Configuration view displays the following information: Ring Name Displays the ASCII name assigned to this ring.
PAGE 77
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Ring Alarm/Threshold/State This section of the TR Ring Configuration view has three columns, displaying information on the ring alarms, their current thresholds, and their states (Enabled or Disabled). Ring Purges Allows you to set a value for the Ring Purges alarm threshold, and the state button allows you to Enable or Disable detection of this alarm.
PAGE 78
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Token Ring Security Configuration View This view provides information on the security configuration for the ring. To access this view click the Ring Security (page 73) button in the Token Ring Configuration View (page 73). Ring Name Displays the ASCII name assigned to this ring. This name defaults to Network n, where n is a unique integer value. Total Allowed Stations Displays the total number of stations in the Allowed Stations list.
PAGE 79
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Allowed Station Address Table This table contains a list of addresses and interface numbers for the stations allowed on the ring. The active monitor for the ring is indicated by an asterisk (*) beside the address. Double-clicking a table entry opens the Modify Allowed Station List View (page 95). This table has the following buttons: Update Allows you to update the contents of the Station Address Table.
PAGE 80
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Token Ring Station Table View This view displays a Station Table containing information for all stations directly connected to the ring. It also displays buttons which manipulate the information in the table, and buttons to access other views. To access the this view highlight the MPlusTRApp Application Icon (page 53) and select Stations from the Icon Subviews menu. Ring Name Displays the ASCII name assigned to this ring.
PAGE 81
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series value to the lowest. Unsort returns the fields to its normal state. Update Updates the contents of the Station Table. Isolating Errors Table Totals/Deltas Opens the Token Ring Station Isolating Errors View (page 82). Totals displays the statistics as totals since the Module was initialized. Deltas displays the difference between the current value and the value at the time of the last update.
PAGE 82
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Token Ring Station Isolating Errors View This view displays an Isolating Errors Table containing information for all stations directly connected to the ring. To access the this view, do the following: • Within the Application view, highlight the MPlusTRApp Application Icon (page 53) and select Station Errors from the Icon Subviews menu. • Click the Isolating Errors Table (page 81) button in the Token Ring Station Table View (page 80).
PAGE 83
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Burst Displays the number of burst errors that this station has detected on the ring. MAC/Canonical This button affects the display of the station addressed, toggling between MAC (Physical) and Canonical (Token Ring). This button displays the format NOT currently selected. A/C Displays the number of address/copied errors that this station has detected on the ring. Abort Displays the number of abort sequences that this station has sent.
PAGE 84
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Non-Isolating Errors Table Station Detail Opens theToken Ring Station Non-Isolating Errors View (page 85). Opens the Token Ring Station Detail View (page 90). Alarms Table Station Alarms Opens the Token Ring Station Alarm Thresholds View (page 87). Opens the Station Alarms Dialog Box (page 92). Remove Station Removes the selected station from the ring.
PAGE 85
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Token Ring Station Non-Isolating Errors View This view displays information for all stations directly connected to the ring. To access this view, click the NonIsolating Errors Table (page 84) button in the Token Ring Station Isolating Errors View (page 82). Ring Name Displays the ASCII name assigned to this ring. This name defaults to Network n, where n is a unique integer value. Station Name Displays the ASCII name assigned to this station.
PAGE 86
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Update Sort Up/Sort Down/Unsort Updates the contents of the Token Ring Station Non-Isolating Errors Table. Sort Up organizes the list within a selected column form the lowest alphanumeric value to the highest. Totals/Deltas Sort Down organizes the list within a selected column form the highest alphanumeric value to the lowest. Affects the display of statistical information.
PAGE 87
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Token Ring Station Alarm Thresholds View This view displays information for all stations directly connected to the Token Ring.
PAGE 88
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Burst Displays the threshold setting for burst errors on the device. A/C Displays the setting for address/copied errors on the device. Internal Displays the threshold setting for internal errors on the device. Congestions Displays the threshold setting for congestion errors. Clear Filter returns the Station table to its normal state.
PAGE 89
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Station Alarms Opens the Station Alarms Dialog Box (page 92). Remove Station Allows you to remove the selected station from the ring.
PAGE 90
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Token Ring Station Detail View This view includes three color-coded pie charts presenting a breakdown of token ring application statistics. Each statistic is presented as a total amount since the device was initialized and as a percentage of overall traffic.
PAGE 91
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Pie Charts Table 24 through Table 26 list the statistics and definitions for each of the pie charts displayed in this view. Table 25: Table 24: Statistic Frame Breakdown Pie Chart Statistic Definition Frames The total frames detected on this station or ring. Errors The total errors detected by this station or ring. Table 25: The total times the station acting as active monitor recognizes an error condition requiring a token be transmitted.
PAGE 92
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Station Alarms Dialog Box The Station Alarms dialog box allows you to read, display, and modify the alarm settings for a single station or list of stations. The list displays the stations that were on the ring at the time the dialog box was opened. You can read and modify the settings to a valid station that does not appear in the list and was added after opening the view by entering its address in the Station field.
PAGE 93
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series > Apply Moves the selected item from the Stations list to the Apply Settings to list. Applies the threshold settings to the stations listed in the Apply Settings to list or the station entered into the Station field if the list is empty. < Moves the selected item from the Apply Settings to list to the Stations list. >> Moves all of the stations from the Stations list to the Apply Settings to list.
PAGE 94
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Modifying Threshold Settings Reading Thresholds from a Station To change the threshold settings for one or more stations, follow these steps: 1 To read the current threshold settings from any station, follow these steps: Move the addresses of all the stations to be modified to the Apply Settings to list. If you are only modifying the current station, this step is not necessary.
PAGE 95
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Modify Allowed Station List View This view allows you to modify the security for the ring by adding or removing stations from the ring’s list of allowed stations. To access this view, click the Modify Allowed Station List (page 79) button in the Token Ring Security Configuration View (page 78) view. Do not attempt to modify Ring Security without a complete understanding of Token Ring concepts.
PAGE 96
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Allowed Stations window if the security is set to Enable with Alarm. A symbol (>) indicates that this station has recently been moved to the Disallowed Stations window from the Allowed Station window, and will remain until the changes are applied. applied. You cannot move a station from the Allowed Stations window if the security is set to Enable with Alarm.
PAGE 97
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series DELETE Apply Allows you to remove the selected station (refer to the CAUTION earlier in this section). You may remove any station address except that belonging to the device itself, or a station from the Allowed Stations window if the security is set to Enable with Alarm.
PAGE 98
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Changing the Ring Security State To change the level of security on the ring, follow these steps: 1 Click on the desired security option. 2 Click on the Apply button and then select OK in the confirmation window. may be a problem contacting the device, or the address you are trying to add to the station’s allowed list may already exist. Click on the Read button before attempting another update.
PAGE 99
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series SFCS System Configuration View This view contains information used to set up and configure each Virtual Switch. It contains the following information: Admin Status Sets the administrative state of the Secure Fast Cell Switching (SFCS) services for this virtual switch. This controls the SFCS state at a chassis level.
PAGE 100
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Max Stat Entries Indicates the maximum number of stats enabled VCs for this switch. PNNI NSAP Prefix This is the 13-byte Network Server Access Point (NSAP) prefix to use with address registration. Max UPC Entries Indicates the maximum number of UPC enabled VCs for this switch. PNNI Node Level This is the PNNI node level value. The range can be from 0 to 104. Firmware Version This is the Firmware Version of the switch.
PAGE 101
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series SFCS System Status View This table contains the objects that pertain to the operational status of a Virtual Switch. It provides the following: TDM Cell Count Indicates the total number of cells being transferred across the Time Division Multiplexing (TDM) backplane for the entire switch. Currrent UPC Entries Indicates the current number of Usage Parameter Control (UPC) entries for this switch.
PAGE 102
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series SFCS System System Configuration View The following information pertains to the setup and configuration of the Virtual Switch. Admin Reset Resets this Virtual Switch. Writing a value of reset will force a restart of the entire switch, without any graceful shutdown. Any active connections or services will be interrupted. ATOM Persistence This enables or disables ATOM mib persistence.
PAGE 103
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series SFCS Module Configuration Table View This table contains the configuration and administrative information for each SFCS module. It provides the following: Slot The primary index to the SFCS switch table. This identifies the chassis slot number for this switch module. Admin Status Sets the administrative state of the SFCS switching services for this SFCS module. This controls the SFCS state at a module level.
PAGE 104
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Max Cnx Entries Indicates the maximum number of connections which can be established on this switch module. Max Stat Entries Indicates the maximum number of stats enabled VCs for this switch module. Max UPC Entries Indicates the maximum number of UPC enabled VCs for this switch module. Number of ANIMS Indicates the number of ATM Network Interface Modules (ANIMs) currently configured on this switch module.
PAGE 105
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series SFCS Module StatusTable View This table contains the status information for each SFCS switch module. It provides the following: Slot Index Displays the primary index to the SFCS switch table. This identifies the chassis slot number for this SFCS module. Curr CTM Agent Indicates the current board number. TDM Cell Count Indicates the total number of cells being transferred across the TDM backplane for this switch module.
PAGE 106
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Module UPC Table View This table contains the Usage Parameter Control information for this SFCS module. It provides the following: Slot Index Displays the primary index to the SFCS switch table. This identifies the slot number for this SFCS module. Admin Status Sets the administrative state of the SFCS module's UPC engine. Oper Status Indicates the operational state of the SFCS module's UPC engine.
PAGE 107
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Statistics Engine Table View This table contains information for the Statistics engine for a particular switch module. It provides the following: switch counters to 0 and causes Oper Time to also be reset to 0. Slot Index Displays the primary index to the SFCS stats engine table. This identifies the chassis slot number for this SFCS module. Admin Status Sets the administrative state of the SFCS switch statistics engine.
PAGE 108
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series ANIM Configuration Table View This table contains the managed objects used to set up and configure each SFCS ANIM. It contains the following: ANIM Index Specifies the ATM Network Interface Module (ANIM) with which you are dealing. Admin Status Sets the administrative state of the SFCS switch ANIM. Oper Status Indicates the operational state of the SFCS switch ANIM for this SFCS ANIM instance.
PAGE 109
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series ANIM Status Table View This table contains the managed objects used to keep track of, transmit, and receive counts and bandwidth for each SFCS ANIM. ANIM Index A unique value that specifies the ANIM with which you are dealing. Rx Cells Indicates the number of cells received from this ANIM's interfaces. Tx Cells Indicates the number of cells transmitted from this ANIM's interfaces.
PAGE 110
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Interface Configuration Table View This table contains the managed objects used to set up and configure each SFCS switching interface. If Index Specifies the interface with which you are dealing. Buffers Allocated Indicates the number of cells in transmit buffer memory. channelRecoveredClockFromPort3, channelRecoveredClockFromPort4, channelRecoveredClockFromPort5, channelRecoveredClockFromPort6, and notSupported.
PAGE 111
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Interface Statistics Table View This table contains the objects that specify the packet and byte counters for each configured SFCS switching interface. It provides the following: If Index A unique value identifying the interface with which you are dealing. Overflow Dropped Cell Count Indicates the number of cells that were dropped due to queue overflows. Rx Errors Indicates the number of receive path lookup invalid and out of range errors.
PAGE 112
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Connection Configuration Table View This table contains the connection configuration information. Index Displays a unique value used to identify this cross-connect. Low If Index Displays the value of this object that is equal to the low MIB II IfIndex value of the ATM interface port for this cross-connect.
PAGE 113
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series UPC Enable Indicates whether UPC policing is enabled on this VC. Stats Enable Indicates whether statistics will be kept on this VC. Stats Table Counter Size Indicates the size of the drop counter for this VC. Owner Indicates the owner of this cross-connect. Possible values are: other, own, and dontown.
PAGE 114
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Connection Statistics Table This table contains the connection configuration information. It provides the following: CC Index Displays the unique value used to identify this cross-connect. CC Low If Index Displays the value of this object that is equal to the low MIB II IfIndex value of the ATM interface port for this cross-connect.
PAGE 115
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Hi to Lo Tx Cells Indicates the High to Low transmitted cell count for this connection. Hi to Lo Dropped Cells Indicates the High to Low dropped cell count for this connection. Hi to Lo Tagged Cells Indicates the High to Low tagged cell count for this connection.
PAGE 116
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Queue Configuration Table View This group contains the managed objects for maintaining SFCS queues. If Index Identifies the interface with which you are dealing. Queue The index that specifies the transmit queue with which you are dealing. Size Indicates the size of the transmit queue for this queue. EFCI Low Threshold Indicates the lower threshold used for EFCI for this queue. This level is expressed as the percentage of this queue's size.
PAGE 117
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Queue Statistics Table View This table contains the statistics information for all queues on the SFCS. It provides the following: If Index A unique value that identifies the interface with which you are dealing. Queue Displays the index that specifies the queue with which you are dealing. Tx Cells Discarded Indicates the number of cells with CLP=1 that were discarded. Tx Cells Dropped Indicates the number of cells that overflowed the buffer.
PAGE 118
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series CTM Interface Configuration Table View This table contains the configuration information of each configured SHEMP interface. It provides the following: If Index The unique value that identifies which interface you are dealing with. Buffer Allocated Indicates the number of cells in transmit buffer memory. Type Sets the type of interface access attribute for the SFCS interfaces. Possible attributes are described in Table 29.
PAGE 119
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series CTM Interface Statistics Table View This view contains the objects that specify the packet and byte counters for each configured SFCS switching interface. If Index A unique numeric value that identifies the interface you are dealing with. Rx Errs Indicates the number of receive path lookup invalid and out of range errors. VPI Lookup Invalid Errs Indicates the number of VPI lookup invalid and out of range errors.
PAGE 120
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series CTM Queue Configuration Table View This table contains the CTM configuration information for all queues on the SFCS. It includes the following: IF Index A unique value that identifies the interface with which you are dealing. Queue The index that identifies the transmit queue with which you are dealing. Size Indicates the size of the transmit queue. Bandwidth Indicates the percentage of this interface's bandwidth utilized by this particular queue.
PAGE 121
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series CTM Queue Statistics Table View This view contains the statistics information for all queues on the SFCS. If Index A unique value that indicates which interface you are dealing with. Queue The index that idfentifies the queue with which we are dealing. Tx Cells Discarded Indicates the number of cells with Cell Loss Priority equal to one (CLP=1) that were discarded for this queue.
PAGE 122
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series BW Manager NIM Information Table View This table contains contains information about the administrative status of the NIM Nim Index A unique value that identifies which Network Information Module (NIM) you are dealing with. This reference is in the same format as MIB II's Interface index. Admin Status Indicates the administrative status of this NIM.
PAGE 123
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series BW Manager Port Information Table View This table contains the following information: Port Index This index identifies the port with which you are dealing. Admin Status Indicates the administrative status of this Port. Forward Physical Bandwidth This is the forward physical bandwidth of the port measured in cells per second. Reverse Physical Bandwidth This is the reverse physical bandwidth of the port measured in cells per second.
PAGE 124
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series BW Manager Port Pool Limits Table View This table contains the lowing information: Port Index A unique numeric value that specifies which Port you are dealing with. Pool Index This index specifies the Pool within the Port that you are dealing with. Max Allocated Bw Forward Upper Limit for BW to be allocated in a forward direction. It defaults to the physical BW and is set by administrative action.
PAGE 125
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series is really 128/256 (or 50%). The default value is 255.
PAGE 126
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series BW Manager Port Pool Statistics Table View This table contains the following ionformation: Port A unique value that specifies which Port you are dealing with Avail Bw Rev The current amount of available bandwidth in the reverse direction. Pool This index specifiesthe Pool within the Port that you are dealing with. Peak Bw Fwd The peak amount of allocated bandwidth in the forward direction since the port was initialized or the switch was reset.
PAGE 127
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series BW Manager Port Pool Trap Management Table View This table contains the following information: Port A unique value that specifies the port with which you are dealing. Pool This index specifies the Pool within the Port that you are dealing with. Fwd Alloc Bw Upper The upper threshold for the Alloc BW fwd trap. When an allocation causes the currently allocated bandwidth to exceed this value, a trap is generated.
PAGE 128
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Modeling Considerations Some conditions apply concerning the placement (modeling) of model types within SPECTRUM views. The following restrictions apply: Figure 27: Example SmartSwitch 9000 Topology Front Panel Interface LAN Icons • Ethernet devices can be modeled in the Universe Topology view or an 802.3 LAN Topology view • Token Ring devices can only be modeled in an 802.
PAGE 129
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Manual Modeling Summary Modeling the SmartSwitch 9000 chassis manually in SPECTRUM involves modeling one of the modules contained within the chassis, locating the SmartSwitch 9000 Location icon in the Lost and Found View, creating a Room Location View and copying the SmartSwitch 9000 Location icon to the Room Location View. From the SmartSwitch 9000 Location View icon you can access the views available for the SmartSwitch 9000 Chassis.
PAGE 130
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series • Topology View refers to the view that the FDDI LAN (backplane), other networks (frontpanel interfaces), and some modules are modeled in • FDDI LAN Topology View refers to the view that contains the FddiMAC models that represent the connections to the FNB Modeling the Chassis The SmartSwitch 9000 chassis is modeled indirectly using one of the modules it contains.
PAGE 131
SPECTRUM Enterprise Manager Table 31: ChassisPosition Example SmartSwitch 9000 Module Identification Worksheet Module Type 9F116-01 SmartSwitch 9000/9500 Series IP Address 192:168:123:45 1 2 3 4 5 6 7 8 9 10 11 12 13 14 131 of 145 MAC Address 00:00:12:34:56:78
PAGE 132
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Placing the Chassis Location Icon in the Location View The Chassis Location icon must be copied into a Room Location View to allow access to the views available from the Location icon. Create a Room Location View as follows: 1 2 3 9 a Select New View from the View menu. b Select Lost & Found from the New View menu. Copy the Chassis Location icon into the Room View as follows: a From the View menu select New View > Location.
PAGE 133
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Modeling the Modules in the Chassis The following instructions are used to manually model modules in the SmartSwitch 9000 . The “Quick Steps” are intended to provide a basic understanding of the process as well as a quick reference for modeling the modules. For more detailed instructions for modeling modules in the SmartSwitch 9000 , refer to the procedures following the “Quick Steps.
PAGE 134
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Modeling the Flexible Network Bus (FNB) Model an FDDI LAN to represent the FNB (FNB1 or FNB2) as follows: 1 Select New Model... from the Edit menu. 3 Select FDDI from the Select Model Type dialog box. Click OK. 4 5 • 9F426-08 • 9E423-24 In the Topology View, select Edit from the File menu. 2 Modeling the Modules Connected to the FNB (page 134).
PAGE 135
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series • 9F122-12 • 9F125-08 • 9F241-12 1 In the Topology view, model the modules listed in the worksheet that are connected to the FNB as follows: a Select Edit from the File menu. b Select New Model By IP... (used for example) from the Edit menu. c Enter the Network (IP) Address (from the work sheet) and the Community String (optional) for the module you wish to model. Click OK.
PAGE 136
SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series Building the FNB Ring in the FDDI LAN Topology View 3 From the Topology view, click the Topology Arrow on the FDDI LAN icon to open the FDDI LAN Topology view. The FNB ring displays the FDDI Media Access Controller (FddiMAC) models or GenFddiMAC models representing the connection to the FNB ring on the backplane. To model the ring automatically use the procedure described in the RingView for FDDI User’s Guide.
PAGE 137
SPECTRUM Element Management SmartSwitch Series 9000 Index Symbols < Button 93, 96 << Button 93 > Button 93, 96 >> Button 93 Numerics 9A128_01 9 9A426_02 9 9E1132-15 9 9E133-36 9 9E138-12 9 9E138-36 9 9E423_24 10 9E423_36 10 9E428_12 10 9E428_36 10 9E429_12 10 9E429_36 10 9F106-02 12 9F116-01 12 9F120_08 12 9F122_12 12 9F125_08 12 9F206-02 12 9F241_12 12 9F426 -02 11 9F426-03 11 9G421-02 12 9G426-02 12 9G429-02 12 9H421_12 11 9H422-12 11 9H423_26 11 9H423_28 11 9H429-12 11 9T122-08 13 9T122-24 13 9T125-0
PAGE 138
SPECTRUM Element Management States Table Button 88 Table Button 73, 81, 84, 86 Alarms Broadcast 66 Collisions 66 Error 66 Traffic 66 Alignment 67 Allowed Station 95 Address Table 79 AMP Errors 77 ANIM Index 108, 109 ANIM Type 108 Application ATM (ATMClientApp) 54 Bridging (CSIBridge) 54 Chassis Manager (MMACChasApp) 54 DownLoad (CtDownLoad App) 54 Fast Ethernet (FastEnetApp) 54 FDDI (FddiMAC) 54 MIB-II (SNMP2_Agent) 54 MMACPlus Repeater (MMACPlusRptr) 54 MMACPlus Token Ring (MPlusTRApp) 54 Application Acce
PAGE 139
SPECTRUM Element Management Claim Token Errors 77 Claim/Beacon Process 60 Clear Filter Button 79 Climate 28 Close 74 Clp Drop Threshold 116 Cnx Table Size 99, 104 Collision Alarms 66 Threshold 66 Collisions Out of Window 67 Commands 74 Component Table 56 Concentrator 68 Isolated 60 Configuration View 70 Address Type 71 Admin Address 71 Conf VCCs 70 Conf VPCs 70 CSIIf Port 52 Device 56 FddiMAC Device 58 Find 71 ILMI VCI 71 ILMI VPI 70 Max VCCs 70 Max VCI Bits 70 Max VPI Bits 70 SmartSwitch Series 9000 Nei
PAGE 140
SPECTRUM Element Management Enabled (ENB) 46 EnabledWithAlarm 78 EnabledWithRemoveAndAlarm 78 Engine Reset 107 Environmental Device View 28 Environmental Module 129 Environmental Module Information 23 ERCI Low Threshold 116 Error 63, 80, 91 Alarms 66 Monitor Count Link 62 Monitor Reject Count Link 63 Rate Alarm Link 63 Rate Cutoff Link 63 Rate Estimate Link 62 Report Timer 74 Source 67 Threshold 66 Ethernet MicroLAN Switch Modules 9 Ethernet SmartSwitch INB 2 Modules 10 Ethernet SmartSwitch INB Modules 10
PAGE 141
SPECTRUM Element Management Hi to Lo Dropped Cells 115 Hi to Lo Tagged Cells 115 Hi to Lo Tx Cells 115 High If Index 112, 114 High VCI 112, 114 High VPI 112, 114 Host Configuration 74 Error Status 75 Host Ctrl ATM Address 103 Humidity 28 I Icon Application 53 ATM Chassis Module 40 Backplane Module 46 Chassis Module 36 Ethernet Chassis Module 37 FDDI Chassis Module 38 Interface 50 Token Ring Chassis Module 39 Icon Subviews 55 Icon Subviews Menu Application Label 42 Chassis Module 41 FDDI Port Label 44 FDDI
PAGE 142
SPECTRUM Element Management Low If Index 112, 114 Low VCI 112, 114 Low VPI 112, 114 M MAC Address 51, 58 Label 50 Button 79 Configuration 58 Count 58 MAC Address 51 Mac Cnx Entries 99 Main Pwr Bus 29 Master 62 Ports 58, 68 Max Cnx Entries 104 Max Stat Entries 100, 104 Max UPC Entries 100 Max VCCs 70 Max VPCs 70 Max VPI Bits 70 Maximum Frame Size 56 MIB-II Applications 19 Miscellaneous Applications 19 Model FDDI LAN 133 Model Information View 33, 52 Model Type Label 36, 47 SmartSwitch Series 9000 Model T
PAGE 143
SPECTRUM Element Management P Packets Giant 67 Runt 67 Paste 132 Path Current MAC 58 Peak Level 117 Performance View 33 Physical 79 Physical Address 56 Physical Device View 30 Policing Support 100 Port 80 Action 62 Configuration 74 View 57 Count 64 Management 62 Notes 46 Security Network 64 State 62 Type 62 Port Configuration FDDI 44 Token Ring Port 46 Port Configuration - CSIIf Port 57 Port Configuration View 62 Port Label 45 Port Number Label 42, 44 SmartSwitch Series 9000 Port Status Label 42, 44, 45
PAGE 144
SPECTRUM Element Management Runts 67 Rx Cell Count 111 Rx Cells 109 Rx Cnx Lookup Invalid Errors 111 Rx Errors 111 S Security Network Port 64 Security Administration State 95 Segmentation Traps 65 Select Model Type dialog box 132 Set Filter Button 79 SFCS MIB Rev 103 SFCS MIB Version 103 Sig Stack Id 110 Size 116 Slave 62 Slot Dependencies for the 7C03 15 Slot Index 103, 105, 106, 107 Slot Number Label 36 SmartCell Switches 14 SmartSwitch 9000 Series Overview 7 SMB 1 and SMB 10 Icons 47 SMB 1/SMB 10 25 SM
PAGE 145
SPECTRUM Element Management Token 85, 91 Errors 77 Ring Security Configuration View 78 Station Alarm Thresholds View 82 Detail View 90 Non-Isolating Errors View 85 Table View 80 Rotation Time Target 59 Token Ring Label 44 Change Ring Speed 45 Configuration 45 Model Information 45 Station Errors 45 Stations 45 Token Ring Port Labels 45 Token Ring SmartSwitch Module 13 Topology View 130 Total 28, 72 Allowed Stations 78 Totals Button 81, 83, 86 TR MicroLAN Switch Modules 13 TR Ring Configuration View 73, 76 T