® Management Module Software Release Notice 5.
9031445 E9 Management Module SPECTRUM Software Release Notice 5.
Notice Cabletron Systems reserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Cabletron Systems to determine whether any such changes have been made. The hardware, firmware, or software described in this manual is subject to change without notice.
Restricted Rights Notice (Applicable to licenses to the United States Government only.) 1. Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013. Cabletron Systems, Inc., 35 Industrial Way, Rochester, New Hampshire 03866-5005. 2. (a) This computer software is submitted with restricted rights.
Contents Preface Purpose of This Document .....................................................................................................v How This Document Is Organized ....................................................................................... vi Typographical Conventions.................................................................................................. vi Version Control ......................................................................................................
TRBMIM Token Ring Module ....................................................................................... 35 Ethernet Hubs .............................................................................................................. 36 Generic SNMP Devices ................................................................................................. 37 RMON Management Module ........................................................................................ 38 Netlink FRX1800 ...............
Preface This chapter describes the purpose and content of the Management Module SRN, explains the SPECTRUM® version control scheme, and identifies additional sources of information about SPECTRUM products. Purpose of This Document This Software Release Notice (SRN) accompanies each copy of the release package for the FCS release of version 5.0 rev 1 for SPECTRUM’s management modules. A new SRN is issued and packaged with each subsequent SPECTRUM release.
How This Document Is Organized How This Document Is Organized This SRN lists the following information for each management module, or group of related modules: • the SPECTRUM part number, or product ID, which represents each device, firmware version, and management module (mm) version. • anomalies corrected since the last release, removed from the known anomalies list and added to the corrected anomalies. • existing known anomalies from the last release. • known anomalies discovered since the last release.
Version Control Version Control SPECTRUM’s numbering scheme for version control consists of up to four numeric fields as well as an alphabetic descriptor as shown in the following diagram. 5.0 rev 1.00 Major Release Minor Release Descriptor Revision Build Major Release - Increments to the number in this field represent major changes in the product’s design, functionality, or user interface. Major releases are planned well in advance and occur no more frequently than once per year.
Related SPECTRUM Documentation Related SPECTRUM Documentation Refer to each management module’s documentation for more information on that product. Questions about SPECTRUM Documentation Send your questions, comments or suggestions regarding SPECTRUM documentation to the Technical Communications Department directly via the following internet address: E-MAIL Preface viii spectrum-techdocs@ctron.com Management Module Software Release Notice 5.
Anomalies This chapter lists the corrected and known anomalies for each product. Cabletron proprietary products are listed towards the beginning of the chapter, and third-party products are listed towards the end of the chapter. SPMA anomalies effecting various SPECTRUM management modules are listed at the end of the chapter. ATX LAN Switch SPECTRUM Part Name SM-CSI1070 Device ATX LAN Switch Firmware Version 4.01.04 MM Version 5.0 rev1 Corrected Anomalies: 1.
SmartSwitch 2000 Family SmartSwitch 2000 Family SPECTRUM Part Name Devices Firmware Version MM Version SM-CSI1068 2E42-27 2E42-27R 2E42-27RDC 2E43-27 2E43-27R 2E43-51 2E43-51R 2E48-27 2E48-27R 2E49-27 2E49-27R 2E253-49R 4.01.10 5.0 rev1 SM-CSI1080 2H22-08R 2H23-50R 2H28-08R 2H33-37R 2H252-25R 4.01.10 5.0 rev1 2M46-04R 2M46-04RDC 4.01.10 SM-CSI1087 1.01.10 5.0 rev1 Corrected Anomalies: None. Known Anomalies: Problem 1: After completing an upgrade from 4.0 rev 3 to 5.
SmartSwitch 6000 Family SmartSwitch 6000 Family SPECTRUM Part Name Devices Firmware Version MM Version SM-CSI1076 6E122-26 6E123-26 6E123-50 6E128-26 6E129-26 6E132-25 6E133-25 6E133-49 6E138-25 6E139-25 6E233-49 4.01.10 5.0 rev1 SM-CSI1082 6H122-08 6H122-16 6H123-50 6H128-08 6H129-08 6H133-37 6H202-24 6H252-17 4.01.10 5.0 rev1 6M146-04 4.01.10 SM-CSI1088 1.01.10 1.01.10 5.0 rev1 Corrected Anomalies: None.
SmartSwitch (7CO3/04) SmartSwitch (7CO3/04) SPECTRUM Devices Part Name SM-CSI1062 7CO3 SmartSwitch (2-slot) Firmware Version 1.04.05 7CO4 Workgroup (4-slot standalone) 3.01.02 7CO4-R Workgroup (4-slot standalone) 3.01.02 MM Version 5.0 rev1 Corrected Anomalies: 1. Launching the Device Topology view from a CSIIfPort in the Interface Device view now displays appropriate Device Icon panel information. 2.
Fast Ethernet SmartSwitch (8H02-16) Fast Ethernet SmartSwitch (8H02-16) SPECTRUM Devices Part Name SM-CSI1068 8H02-16 SM-CSI1068 8H02-16 ADV Firmware Version 1.02.03 (8/97) 2.02.01(6/97) MM Version 5.0 rev1 5.0 rev1 Corrected Anomalies: 1. SS8H traps now generate appropriate events in the Events log. Known Anomalies: None.
SmartSwitch 9000 Management Modules SmartSwitch 9000 Management Modules Anomalies 14 SPECTRUM Part Name Devices Firmware Version MM Version SM-CSI1030 9E132-15 9E133-36 9E138-12 9E138-36 2.06.03 2.06.03 2.06.03 2.06.03 5.0 rev1 SM-CSI1031 9F116-01 2.00.03 5.0 rev1 SM-CSI1032 9F120-08 9F122-12 9F125-08 9F106-02 9F116-01 9F241-12 2.00.04 2.00.04 2.00.04 1.03.03 boot 2.00.03 2.00.04 5.0 rev1 SM-CSI1035 9F310-02 9F426-02 9F426-02 ADV 9F426-03 9F426-03 ADV 1.00.30 1.10.14 3.01.06 1.10.14 3.
Common Anomalies - SmartSwitch 9000 Management Modules SM-CSI1066 9H421-12 9H421-12 ADV 9H422-12 9H422-12 ADV 9H423-26 9H423-26 ADV 9H423-28 9H423-28 ADV 9H429-12 9H429-12 ADV 1.10.14 3.01.06 1.10.14 3.01.06 1.10.14 3.01.06 1.10.14 3.01.06 1.10.14 3.01.06 5.0 rev1 SM-CSI1073 9A656-04 2.01.07 5.0 rev1 SM-CSI1074 9G421-02 9G421-02 ADV 9G426-02 9G426-02 ADV 9G429-02 ADV 1.10.14 3.01.06 1.10.14 3.01.06 3.01.06 5.0 rev1 SM-CSI1083 9T425-16 1.08.13 5.0 rev1 SM-CSI1092 9M426-02 1.01.01 5.
Common Anomalies - SmartSwitch 9000 Management Modules Problem 2: Currently, you can create SmartSwitch 9000 models in Location or Organization views, even though a Contains relation cannot be established with the SmartSwitch chassis model, and the models do not show up in the Device view of the SmartSwitch.
SmartSwitch Token Ring MicroLAN Switch (9T122-08, 9T122-12, and 9T122-24) SmartSwitch Token Ring MicroLAN Switch (9T122-08, 9T122-12, and 9T122-24) Corrected Anomalies: 1. The Detail view accessed from the Bridge Application icon has been removed from the 9T122-24 device since the 9T122-24 device no longer supports the CtBridgeTp group. Known Anomalies: Problem 1: In the Physical Device view, the TPIMs (ring-in, ring-out ports) do not display.
SmartSwitch FDDI MicroLAN Switch (9F106-02, 9F116-01, 9F120-08, 9F122-12, 9F125-08, and SmartSwitch FDDI MicroLAN Switch (9F106-02, 9F116-01, 9F120-08, 9F122-12, 9F125-08, and 9F241-12) Corrected Anomalies: 1. The FddiMAC Station List view button now toggles from Canonical and MAC address format for the Downstream Neighbor and the Upstream Neighbor columns. 2. You can now access the FDDI2 Icon from List mode, and view Performance statistics.
ATM Access Modules (9A128-01, 9A426-01, 9A426-02) ATM Access Modules (9A128-01, 9A426-01, 9A426-02) Corrected Anomalies: 1. You can now access the DevTop view for the 9A426-02 without triggering “Device not Configured” messages. 2. The Simplified Device view within the DevTop now shows the correct device image. 3. The 9A128-01 model type can now be used to model the ATMClientApp application.
FDDI SmartSwitch (9F310-02, 9F426-02, 9F426-03) FDDI SmartSwitch (9F310-02, 9F426-02, 9F426-03) Corrected Anomalies: 1. The FDDI switch is correctly associated with the SmartSwitch Chassis model upon creation, and the Chassis Device view appears with appropriate information. 2. The Performance and Detail views for the CSIBridge Application now show appropriate statistics.
Fast Ethernet SmartSwitch (9H421-12, 9H422-12, 9H423-26, 9H423-28, 9H429-12) Fast Ethernet SmartSwitch (9H421-12, 9H422-12, 9H423-26, 9H423-28, 9H429-12) Corrected Anomalies: 1. For the Device view of the 9H421-12, after a board is hot-swapped to a different slot in the SmartSwitch chassis and the view is refreshed, the board now appears in the correct slot with the correct slot number. Known Anomalies: None.
ATM SecureFast Cell Switch (9A656-04) ATM SecureFast Cell Switch (9A656-04) Corrected Anomalies: 1. When you model a 9A656-04 by model type SFSmartCell and navigate into the Application view, the PredSwitchApp no longer appears in an alarm state. The Interface Configuration view also no longer shows alarms. Known Anomalies: Problem 1: ATMDISC does not resolve the port connection for the 9A656-04. Although you may see a connection between the switches, you will need to resolve the port manually.
Gigabit Ethernet SmartSwitch (9G421-02, 9G426-02, 9G429-02) Gigabit Ethernet SmartSwitch (9G421-02, 9G426-02, 9G429-02) Corrected Anomalies: 1. The SPMA Component Table and Trap Table can now be launched from the Configuration View of the 9G426-02. Known Anomalies: None.
ForeRunner Series of ATM Switches ForeRunner Series of ATM Switches SPECTRUM Device Part Name SM-FOR1000 ASX-100 ASX-200 ATM LAX-20 Firmware Version 2.3 3.x 3.4.2.x MM Version 5.0 rev1 Corrected Anomalies: None. Known Anomalies: Problem 1: Some fields for ASX and OC3 models are red-boxed in the Application Port view (accessed from the Application Configuration view’s Port Table). Solution: The management module functions as designed. This is a firmware problem.
NBR 620, 420, and 220 (Ethernet Bridge Routers) NBR 620, 420, and 220 (Ethernet Bridge Routers) SPECTRUM Device Part Name SM-CSI1021 NBR NBRBridge/ Routers Firmware MM Version Version 2.20.08 5.0 rev1 3.00.09 (1.11.01 22/24E) Corrected Anomalies: 1. In the NBR Chassis Device view, the icon’s channel status now appears. 2. The Physical Device view shows a properly inserted BRIM. Known Anomalies: Problem 1: The NBR620 only shows 4 ports in its Device view.
FDM FDM SPECTRUM Device Part Name SM-CSI1012 FDMMIM FDMMIM-04 Firmware Version 4.07.06 MM Version 5.0 rev1 Corrected Anomalies: 1. Generic Bridging applications no longer show errors in the performance percentages displayed in the Performance views. 2. If you change the community name of the FDMMIM to anything other than public, Autodiscovery now models the device as pingable. Known Anomalies: Problem 1: There are no statistical reports being generated for the BdgCSIFDM icon.
EMME/EMM-E6 EMME/EMM-E6 SPECTRUM Device Part Name SM-CSI1004 EMME EMME - Routing SM-CSI1004 EMM-E6 EMM-E6 ADV Firmware Version 3.08.01 1.01.02 3.22.01 4.01.12 MM Version 5.0 rev1 5.0 rev1 Corrected Anomalies: 1. All of the EMME channels now appear in the monitor point list for a LAN_802_3 model. 2. FDMIMs now appear in the proper slots in the Simplified Device panel of the Device Topology view. Known Anomalies: Problem 1: EMME firmware and flash EPROM versions earlier than 1.02.
EMME/EMM-E6 Problem 5: There is a green or black dot visible in the Physical Device view of the EMM-E6 models. Solution: This problem will be fixed in a future release. Problem 6: If you create an EMME/EMM-E6 model in the Topology view, the Icon Subviews menu for the device will be missing the “Modules” option. This does not occur, however, if you copy the EMME/EMM-E6 into the Location view from the Topology view.
SEHI Hubs SEHI Hubs SPECTRUM Device Part Name SM-CSI1020 SEHI (Stackable Hubs) SEHI-22 SEHI-24 SEHI-32 SEHI-34 SM-CSI1075 SEHI100TX SEH100TX-22 Firmware Version 1.10.04 MM Version 5.0 rev1 1.00.06 5.0 rev1 Corrected Anomalies: 1. In the Model Information view for the SEHI-22S, the polling period now displays appropriate information. 2. Connections are no longer lost when changes are made in the Device Topology view.
ESXMIM (Ethernet Switching Bridge) ESXMIM (Ethernet Switching Bridge) SPECTRUM Device Part Name SM-CSI1039 ESXMIM ESXMIM ADV ESX-1320 ESX-1320 ADV ESX-1380 Firmware MM Version 2.30.03 5.10.03 2.30.03 5.10.03 5.0 rev1 Corrected Anomalies: 1. In the Interface Device view, the A6 BRIM now displays as an ATM port. The ESXMIM-1320 supports the ATM application.
ETWMIM (Bridging Module) ETWMIM (Bridging Module) SPECTRUM Device Part Name SM-CSI1024 ETWMIM, ETWMIM APPN Firmware Version 1.30.05 MM Version 5.0 rev1 Corrected Anomalies: 1. Interface information is updated dynamically when you install or remove boards in the DevTop or Device views. 2. The Update button in the Static Table view now functions correctly. Known Anomalies: Problem 1: In the RS232 Synchronous Port Detail view, the Clock Source field cannot be updated.
TRMM and TRMMIM Token Ring Modules TRMM and TRMMIM Token Ring Modules SPECTRUM Device Part Name SM-CSI1023 TRMM SM-CSI1025 TRMMIM TRMMIM-1 Firmware Version 3.01.06 3.01.01 MM Version 5.0 rev1 5.0 rev1 Corrected Anomalies: 1. Opening the Device view for a TRMM-2 model with an empty Slot Table no longer causes a core dump. Known Anomalies: Problem 1: The Device view does not show the correct port status nor the board names. Solution: This problem will be fixed in a later firmware release.
TRMM-2 and TRMM-4 Token Ring Modules TRMM-2 and TRMM-4 Token Ring Modules SPECTRUM Device Part Name SM-CSI1040 TRMM-2 SM-CSI1041 TRMM-4 Firmware MM Version 2.00.03 2.00.03 5.0 rev1 5.0 rev1 Corrected Anomalies: 1. For the TRMM-4, selecting the Alarm Manager’s HubCSITRMM4 icon and choosing Device -> Chassis now accesses the Chassis Device view with correct statistics. 2.
TRXI Intelligent Token Ring Module TRXI Intelligent Token Ring Module SPECTRUM Device Part Name SM-CSI1015 TRXI-22 TRXI-24 TRXI-42 TRXI-44 TRXI-22A TRXI-24A TRXI-42A TRXI-44A Firmware Version 2.00.06 MM Version 5.0 rev1 Corrected Anomalies: 1. If device contact is lost and re-established while the Device view is open, the Frames and Errors Gauges no longer max out. Known Anomalies: Problem 1: For the HubCSITRXI, the Map Hierarchy view shows unidentified icons with wrong TrxiBoard numbers.
TRBMIM Token Ring Module TRBMIM Token Ring Module SPECTRUM Device Part Name SM-CSI1016 TRBMIM Firmware Version 2.03.01 MM Version 5.0 rev1 Corrected Anomalies: 1. When the Station and FNB ports are connected, the Port Status no longer displays “DIS” in the DevTop and Device views. 2. The SNACMIM board is now recognized by the TRBM (or other intelligent MIM) and appears in the Device and DevTop views.
Ethernet Hubs Ethernet Hubs SPECTRUM Part Name SM-CSI1000 SM-CSI1000 SM-CSI1000 SM-CSI1000 SM-CSI1000 SM-CSI1000 Device IRBM, IRM-2, IRM-3 IRM-3 BP MINIMMAC MRXI 22/24 MRXI-2E MRXI-93 SNMP IRM Firmware Revision 1.07.02 MM Version 5.0 rev1 2.00.01 2.03.04 5.0 rev1 5.0 rev1 1.11.09 2.03.02 2.03.02 5.0 rev1 5.0 rev1 5.0 rev1 Corrected Anomalies: None. Known Anomalies: Problem 1: In the IRBM’s DevTop view, the Edit menu’s New Model option does not list LAN802.3 or LAN802.
Generic SNMP Devices Generic SNMP Devices SPECTRUM Device Firmware Part Name Version SM-CSI1017 Generic SNMP N/A MM Version 5.0 rev1 Corrected Anomalies: 1. System Uptime in the view banners updates when the views are first displayed. Known Anomalies: None.
RMON Management Module RMON Management Module SPECTRUM Device Part Name SM-CSI1014 Remote Monitoring Firmware Version N/A MM Version 5.0 rev1 Corrected Anomalies: None. Known Anomalies: Problem 1: After launching the RMON Suite from the command line of a Cisco Frontier Switch Probe modeled as a GnSNMPDev, MAC addresses in the Host Matrix table appear incorrectly.
Netlink FRX1800 Netlink FRX1800 SPECTRUM Part Name SM-CSI1078 Device Firmware MM Version FRX1800 FRX4000 FRX6000 4.0.0 4.0.1.1 4.0.1.1 5.0 rev1 Corrected Anomalies: 1. The FRX1800 can now be modeled in the normal fashion using the Creating dialog box. Known Anomalies: Problem 1: The Device Topology and Interface Device views of the FRX6000 and 4000 show high load information for interfaces that are not active. Active ports, however, do show correct load information.
Banyan VINES File Server II Banyan VINES File Server II SPECTRUM Device Part Name SM-BAN1001 Banyan II File Server Agent Firmware Version 5.52(5) 2.x snmp agent MM Version 5.0 rev1 Corrected Anomalies: 1. SNMP requests for attributes in the OS Groups no longer cause red boxes to appear in the OS view. 2. In the case where a server is used as a Proxy for other devices, SNMP requests for attributes in the OS Groups no longer fail and cause red boxes to appear. Known Anomalies: None.
SynOptics 5000 Hubs SynOptics 5000 Hubs SPECTRUM Device Part Name SM-SYN1003 53xx Enet 55xx TR 59xx FDDI SM-SYN1007 SynOptics D5xxx Firmware Version 1.5.1 1.5.1 2.2.6 1.5.0 MM Version 5.0 rev1 5.0 rev1 Corrected Anomalies: 1. You can now open the Configuration view for HubSyn5DNxxx from its OPR icon. 2. Setting a security string for a HubSyn5xxx model now prevents users without permission from accessing all SPECTRUM views.
SynOptics 5000 Hubs Problem 4: Traps are only generated against the IP address of the first Data Collection Engine (DCE) on an Ethernet or Token Ring Network Management Module (NMM). If contact is lost with the first DCE, the user will not receive traps. Solution: This is a firmware problem. Problem 5: In the Device view, TR DCE icons may disappear and the NMM Module menu selections will change to a default Module Notes and Module Configuration.
SynOptics Modules SynOptics Modules SPECTRUM Device Part Name SM-SYN1001 HubSyn3FDDI (SynOptics 3000) SM-SYN1002 HubSynEnet28xx (SynOptics 28xx) SM-SYN1004 SynOptics 332xS (Enet Bridge) SM-SYN1005 SynOptics 39xx (FDDI) SM-SYN1006 SynOptics 28xxx SM-SYN1008 HubSyn27xx (SynOptics 27xx) SM-SYN1009 HubSyn29xx (SynOptics 29xx) Firmware Version 5.1.0 MM Version 5.0 rev1 5.3.1 5.0 rev1 1.0.0 5.0 rev1 2.0.48 5.0 rev1 2.0.3 5.11 5.0 rev1 5.0 rev1 2.2.4 5.0 rev1 Corrected Anomalies: 1.
SynOptics Modules Problem 2: The 3000 Series Chassis has one Ethernet Backplane which can be broken into multiple segments so that more than one Network Management Module (NMM) can exist in the same chassis. HubSynSer3xxx Device views show all the Ethernet modules on the chassis instead of just the modules on the segment. Only the modules on the segment, however, have port information and configuration capability. Solution: This problem will be fixed in a future release of SPECTRUM.
Cisco Catalyst Devices Cisco Catalyst Devices SPECTRUM Part Name SM-CAT1000 SM-CAT1001 SM-CAT1002 Device Firmware MM Version SwCat 1200 (Catalyst Workgroup Switch) HubCat 1400 (Catalyst Workgroup Concentrator) HubCat 5000 (Catalyst 5000) 4.1 5.0 rev1 1.5 5.0 rev1 2.1 5.0 rev1 Corrected Anomalies: 1. In the Catalyst Filter Table, the general spacing and horizontal scroll bar problems have been corrected. 2.
Cisco Router Cisco Router SPECTRUM Device Part Name SM-CIS1001 Rtr_Cisco (Cisco Router 2) SM-CIS1002 Firmware MM Version Version 11.1(8) 5.0 rev1 Rtr_CiscoIGS, 11.2 CGS, AGS, MGS, 2500, 3000, 4000, 7000 Lightstream 11.2(5)/ wa3(2b) 10.10 (ATM Support) 5.0 rev1 Corrected Anomalies: 1. Alarms for Router_Cisco models now stop flashing when the Acknowledge option is used. 2. The Lost & Found view now shows the Large Device icon.
Cisco Router Problem 4: Clicking the Ciscoview menu choice, or the CiscoView button in the Cisco Router MM, does not work. Solution: For the Ciscoview functionality, the user must first install the Ciscoview product. Additionally, the path to the executable must be located in the user path. If these two conditions are not met, the Ciscoview cannot be accessed. Problem 5: When the Cisco router is modeled with a Rtr_Cisco model type, some application models do not appear.
Host Compaq Module Host Compaq Module SPECTRUM Part Name SM-GHO1007 Device MM Version Host Compaq 5.0 rev1 Corrected Anomalies: None. Known Anomalies: Problem 1: The SNMP Agent Detail View is not showing statistical information. Also, the view’s Auth Trap field and the Detail 2 view’s Receive Breakdown and Transmit fields are red-boxed. Changing the Auth Traps from disabled to enabled causes an attribute error message to appear.
Host NT Module Host NT Module SPECTRUM Part Name SM-GHO1004 Device MM Version Windows NT (pc) 5.0 rev1 Corrected Anomalies: 1. Missing base model type error messages no longer appear when installing the SM-GHO1004. Known Anomalies: Problem 1: For the IP2_App application of Host_NT models, the IP Routing view does not display all appropriate fields. Solution: The table is seeing a premature “end of table” being sent from the device. The table then continues to process errors.
Proteon Router Proteon Router SPECTRUM Part Name SM-PRO1001 Device Firmware PteonDNX300, S/N 10574 PteonCNX500, v12.0c[] PteonCNX600, PteonRBX200 (Proteon Router 2) MM Version 5.0 rev1 Corrected Anomalies: 1. When you create two different types of Proteon models, the Device Topology view displays appropriate information in the simplified device panel. Known Anomalies: Problem 1: The PteonCNX500 Configuration view’s Interface Configuration table may have missing fields and blank spaces.
Cayman GatorStar Repeater/Router Cayman GatorStar Repeater/Router SPECTRUM Device Part Name SM-CAY1001 RtrCayGBox RtrCayGMIM RtrCayGStar Firmware MM Version 3.0.3/2.2.0 3.0.3/2.2.0 3.0.3/2.2.0 5.0 rev1 Corrected Anomalies: 1. For Cayman GatorStar models, the Detail view accessed from the SNMP2App’s Performance view now shows “Auth Trap” field values.
Xylogics Terminal Server II Xylogics Terminal Server II SPECTRUM Device Part Name SM-XYL1001 Annex3 Annex3-UX Firmware MM Version 11.0 5.0 rev1 Corrected Anomalies: None. Known Anomalies: Problem 1: For Xyl_CSMIM and Xyl_AnnexII models of devices with firmware versions less than 9.0, the serial number fields in the Device and Application views remain empty. Solution: For versions 9.0 and greater, all views have been updated to support the serial number field.
Xyplex ETSMIM/Terminal Server II Xyplex ETSMIM/Terminal Server II SPECTRUM Part Name SM-XYP1001 SM-XYP1001 SM-XYP1002 SM-XYP1003 Device Firmware MM Version MaxServer ETSMIM ETSMIM ETSMIM 4.4 4.x 5.x 5.x 5.0 rev1 5.0 rev1 5.0 rev1 5.0rev1 Corrected Anomalies: 1. The Device/Device field for the Xyplex models is correctly being read from the device. 2. The Device view for the Xyp_ETSMIM shows the appropriate information fields. Known Anomalies: None.
Wellfleet Routers Wellfleet Routers SPECTRUM Device Firmware Part Name SM-WEL1003 Rtr_Bay_Wflet 7.50 - 11.0 (Wellfleet Router 2) SM-WEL1002 Rtr_Wfleet5xx 5.77 (Wellfleet Series 5 Router) MM Version 5.0 rev1 5.0 rev1 Corrected Anomalies: 1. In the Series 7 Configuration view Address Translation Table, the index column of the table now correctly displays the value 1. 2. In the Series 7 Configuration view, the Console button has been grayed out, since the attributes are no longer supported. 3.
3Com PortSwitch Family 3Com PortSwitch Family SPECTRUM Device Part Name SM-3CM1008 3Com PortSwitch Family Hub Firmware MM Version N/A 5.0 rev1 Corrected Anomalies: None. Known Anomalies: Problem 1: In the 3ComRmonExtApp application, the Configuration view’s rfc1516 Extensions, Host Table, and Alarm Event Table print buttons cause the Graph to crash. Solution: This problem will be fixed in a future release.
3Com 3GH/LanPlex Hubs 3Com 3GH/LanPlex Hubs SPECTRUM Device Part Name SM-3CM1003 LinkBuilder 3GH Firmware MM Version 3GH 2.x 5.0 rev1 3GH/LanPlex LP5K 2.3 5000 3GH/LanPlex LP6F 3.1 6000 SM-3CM1007 3Com sw ver 2.0/ LinkSwitch sw ver 1.04 1000/3000 5.0 rev1 Corrected Anomalies: 1. Under Model Redundancy Configuration for the HubLnPlex 6012 and 2000, attempts to create and save changes to the Create Sub-Interfaces no longer fail. 2.
Kentrox DataSMART Kentrox DataSMART SPECTRUM Device Part Name SM-KEN1001 DataSMART_680 DataSMART_688 Firmware MM Version 1.43 5.0 rev1 Corrected Anomalies: None. Known Anomalies: Problem 1: Several views for the Kentrox DataSMARTApp contain redboxed attributes. Solution: This problem occurs because the device is not returning any values for these attributes. The management module functions as designed; this is a firmware problem.
3Com NetBuilder Hub 3Com NetBuilder Hub SPECTRUM Device Part Name SM-3CM1001 NetBuilder Firmware MM Version 9.x 5.0 rev1 Corrected Anomalies: None. Known Anomalies: Problem 1: In the Policy Control view for the 3ComNetBld2 device, the vertical scroll bar incorrectly indicates that there is more information in the view. Solution: This functionality complies with the SPECTRUM table design.
3Com FMS/MSH 3Com FMS/MSH SPECTRUM Part Name SM-3CM1004 Device Firmware MM Version 10BTi MSH Hubs 1.32 4.01 5.0 rev1 Corrected Anomalies: 1. Ethernet board ports for the MSH Hub will now appear, and attributes in the Module Configuration view are no longer red-boxed. Known Anomalies: Problem 1: If you select the icon in the Alarm view of a Hub3ComMSH,and then open the Application view, a very small primary application button appears in the view’s banner.
Hughes LAN Pro Bridge Hughes LAN Pro Bridge SPECTRUM Part Name SM-HUG1000 Device Firmware MM Version Bridge Mib V2.0 5.0 rev1 Corrected Anomalies: None. Known Anomalies: Problem 1: The IP Address Table view shows red-boxed or blank fields. Solution: This is a firmware problem with the Hughes Bridge Agent, which uses an integer index instead of the IP address as specified by the MIB. Anomalies 60 Management Module Software Release Notice 5.
AT & T StarLAN10 SmartHUB AT & T StarLAN10 SmartHUB SPECTRUM Device Part Name SM-ATT1000 SmartHUB Firmware MM Version 10.0 5.0 rev1 Corrected Anomalies: 1. The Navigate/In view now displays a DevTop view with pipes/ports. Also, the Simplified Device view now shows the SmartHub chassis instead of a Generic SNMP device label. Known Anomalies: Problem 1: The SNMP Agent Detail View, accessed from the Application or Performance views, shows pie charts with missing data breakdown fields.
SPECTRUM Portable Management Applications (SPMA) SPECTRUM Portable Management Applications (SPMA) Corrected Anomalies: None. Known Anomalies: Problem 1: Some of the SPMA applications create/use files to store user-defined information. These files are placed in the directory pointed to by the environment variable CTRONDB. The script used to launch SPMA applications sets the CTRONDB variable to: {Install Directory}/SPMA/db directory as a default.
RingView for Token Ring RingView for Token Ring Known Anomalies: Problem 1: RingView cannot fully map connections within a ring that is configured with multiple hubs or concentrators. This is because the Token Ring device firmware stops mapping MAC addresses to specific ports as soon as it encounters one of the Ring In/ Ring Out ports through which the hubs are connected.
RingView for Token Ring Anomalies 64 Management Module Software Release Notice 5.
Index Numerics 10BTi MSH Hubs 59 2E4x-xx 10 2H2x-xx 10 2M46-04R 10 3Com PortSwitch 55 3ComRmonExtApp 55 3GH 56 3GH/LanPlex 56 53xx Enet 41 6E12x-xx 11 6H12x-xx 11 6M146-04 11 7A06_01 12 7CO3 SmartSwitch 12 7CO4 Workgroup 12 7CO4-R Workgroup 12 7H02-12 12 8H02-16 13 9A128-01 19 9A426-01 19 9A426-02 19 9A42x-xx 14 9A656-04 15, 22 9A686-04 15 9E106-06 14 9E312-12 14 9E423-xx 14 9E42x-xx 14 9F120-08 18 9F122-12 18 9F125-08 18 9F12x-xx 14 9F241-12 18 9F310-02 14, 20 9F426-02 14 9F426-02, 20 9F426-03 20 9G421-02
E L EMM-E6 ADV 27 ESX-1320 30 ESX-1380 30 ETWMIM APPN 31 LanPlex 56 Lightstream 46 LinkBuilder 56 LinkSwitch 1000/3000 56 F M Fast Ethernet SmartSwitch 21 FDMMIM 26 Frames and Errors Gauges 34 FRX1800 39 Major Release vii MaxServer 53 Minor Release vii MRXI- 36 G N Generic SNMP 37 Gigabit 23 Gigabit Ethernet 23 NBR Bridge 25 NBR620 25 NetBuilder 58 Notice i H Host_NT 49 HubCat 1400 45 HubCat 5000 45 HubCat5500 45 HubCSITR model 33 HubCSITRMM2 33 HubCSITRXI 34 HubSyn27xx 43 HubSyn29xx 43 HubSyn5D
S SEHI- 29 SEHI100TX 29 SM 15, 61 SM-3CM1001 58 SM-3CM1003 56 SM-3CM1004 59 SM-3CM1007 56 SM-3CM1008 55 SmartHUB 61 SmartSwitch 9000 14 SM-ATT1000 61 SM-BAN1001 40 SM-CAT1000 45 SM-CAT1001 45 SM-CAT1002 45 SM-CAY1001 51 SM-CIS1001 46 SM-CIS1002 46 SM-CSI1000 36 SM-CSI1004 27 SM-CSI1012 26 SM-CSI1014 38 SM-CSI1015 34 SM-CSI1016 35 SM-CSI1017 37 SM-CSI1020 29 SM-CSI1021 25 SM-CSI1023 32 SM-CSI1024 31 SM-CSI1025 32 SM-CSI1030 14 SM-CSI1031 14 SM-CSI1032 14 SM-CSI1035 14 SM-CSI1036 14 SM-CSI1038 14 SM-CSI1039 3
U No entries. V Virus Disclaimer i W Wellfleet Router II 54 Wellfleet Series 5 54 Windows NT 48, 49 X Xyl_AnnexII 52 Y No entries. Z No entries. Index 4 Management Module Software Release Notice 5.
