Installation guide
11-11
Printer Configuration Problems
3 Check the print queue for any LAT error messages. Enter the following command.
Substitute the name of the queue for EARTH$LASER:
$ SHOW QUE/FULL/ALL EARTH$LASER
EARTH$LASER Terminal queue EARTH$LASER, paused, on
EARTH::LTA8000:, mounted form DEFAULT
/BASE_PRIORITY=4 /DEFAULT=(FEED,FORM=DEFAULT) Lowercase
/OWNER=[1,4] /PROCESSOR=LATSYM
/PROTECTION=(S:E,O:D,G:R,W:W)
/RETAIN=ERROR
Jobname Username Entry Blocks Status
------- -------- ----- ----- -------
LOGIN MMS1 15 25 Retained on error
%LAT-F-NOMSG, message number 01769FBC
Submitted 9-JAN-1998 14:15 /FORM=DEFAULT /PRIORITY=100
File: _DSA109:[MMS1]LOGIN.COM;73
If there are any LAT error messages, get the message number and do the following.
Substitute the message number for 01769FBC:
$ SET MESSAGE SYS$MESSAGE:NETWRKMSG
$ EXIT %X01769FBC
The message text returns as follows:
%LAT-F-CONTIMEOUT, connection timed out, server not
available, or incorrect server name specified
4 Verify the queue for jobs marked "Retained on error".
This message means that the output started and the job aborted while executing.
Reasons include the following:
• The access server port was logged out.
• The access server port is in use.
• The LAT software was shut down on the service node.
• The Ethernet device failed to transmit the job.
• The job was deleted from the queue on the service node.
Step Action