Installation guide

Computer Configuration Problems
12-4
For more information on LAT service connection problems, refer to Chapter 2.
6 Monitor the port status to determine which modem signals are being asserted. Enter
the following command on your access server. Substitute the port number for 2:
Local> MONITOR PORT 2 STATUS
Port 2: (Remote) Server: DS700_08
Access: Remote Current Service:
Status: Connected Current Node:
Sessions: 1 Current Port:
Input XOFFed: No Output Signals: DTR RTS
Output XOFFed: No Input Signals: DCD CTS DSR RXD
For information on configuring your access server for modem signals, refer to the
Network Access Software Management Guide.
7 Verify that the access server port hardware is working correctly. See the section
Verifying a Port for Hardware Failure (page 10-8).
Step Action