Installation guide

16-5
Remote Login Problems
Verify Access Server Memory Usage
The access server has a limited pool of memory. With large networks or many port
sessions, it is possible to run out of memory. When access server memory is filled, the
access server cannot start additional Rlogin sessions. To verify that you have a sufficient
pool of available memory, enter the following command:
Local> SHOW MEMORY STATUS
High Pool Size: 982943 bytes
High Pool Used: 563516 bytes
Low Pool Size: 52480 bytes
Low Pool Used: 1940 bytes
Command Pool Size: 20480 bytes
Command Pool Used: 8428 bytes
MOP Pool Size: 4096 bytes
MOP Pool Used: 148 bytes
To display the memory configuration of your system, enter the following command:
Local> SHOW MEMORY CONFIGURATION
Dynamic RAM: 4M bytes
Non-Volatile RAM: 128K bytes
FlashRAM:
Installed: Yes
Total size: 2 Mbytes
Boot block: Valid
Load image:
Name: WWENG2
Size: 1756988 bytes
Version: Network Access SW Vn.n BLnn-nn