Installation guide

Directed TFTP Problems
17-4
Incorrect Filename
The access server must have the load image file name configured to perform a TFTP load.
Typically the access server stores only the filename without any path information or file
extension. The fully qualified pathname is typically specified by the BOOTP reply packet.
In the case of Directed TFTP, the filename may come from the access server’s NVRAM,
for example, the DEFINE SERVER SOFTWARE command, or from the Mini-Monitor,
for example, the >>> b eth:<filename> command. It is recommended that the TFTP server
be configured with a default directory that immediately contains the access server load
image files.