Installation guide

Messages 500 – 599
22-4
Local> CHANGE PORT 1 MULTISESSIONS DISABLED
For more information on configuring and managing SLIP ports, refer to the Network
Access Software Management Guide.
Local -558- Port already has SLIP HOST ADDRESS
Explanation: The access server port already has a SLIP host address assigned.
Action: Clear the SLIP host address on the access server port. Enter the following
commands. Substitute the number of the port for 1:
Local> CLEAR PORT 1 SLIP HOST ADDRESS
Local> PURGE PORT 1 SLIP HOST ADDRESS
For more information on configuring and managing SLIP ports, refer to the Network
Access Software Management Guide.
Local -559- Port does not have a SLIP HOST ADDRESS
Explanation: You tried to clear the SLIP host address on a port that does not have a SLIP
host address assigned.
Action: Verify that you are clearing the SLIP host address on the correct access server
port. For more information on configuring and managing SLIP ports, refer to the Network
Access Software Management Guide.
Local -560- Cannot have two SLIP sessions on port
Explanation: The access server port already has a SLIP session established.
Action: Verify the access server port for a SLIP session. Enter the following command.
Substitute the port number for 1:
Local> SHOW SESSIONS PORT 1
Port 1: BJS Local Mode Current Session: 2
- Session 2: Connected Interactive SLIP