Installation guide

24-1
Chapter 24
Messages 700 – 799
Overview
Introduction
This chapter provides information on messages 700 – 799.
Messages
Local -701- Command syntax error
or
Local -702- Keyword “keyword” not known or ambiguous
Explanation: You entered a command or keyword incorrectly.
Action: For the appropriate command syntax, refer to the Network Access Software
Commands Reference Guide.
Local -703- Value invalid or out of range, “n”
Explanation: A value specified by n is either out of range (maximum=16) or invalid
under the current circumstances.
Action: For the correct range, refer to the Network Access Software Commands Reference
Guide.
Local -704- Operation requires privilege
Explanation: You entered a command that is not available from a nonprivileged or secure
port.
Action: Use the SET PRIVILEGED command to enable privileges on the port. You must
also enter the privileged password.