Installation guide

Messages 700 – 799
24-12
Local -772- Queued access failed, error or no response from service
Explanation: A queued request was accepted by the service node, but access to the node
failed before the connection was completed for one of the following reasons:
• The service node crashed.
• Queuing is not enabled on the service or service node.
• There is insufficient memory on the access server.
• The requesting port and the service node do not share at least one group code.
Local -773- Keyword keyword not known
or
Local -774- Keyword keyword ambiguous
Explanation: You entered a command or keyword incorrectly.
Step Action
1 Verify that the terminal is configured correctly for session management.
2 Ensure the terminal is configured correctly. Then, initiate another session.
3 If the session management software is not compatible between the terminal and the
access server, you cannot use session management. For more information on
configuring a session management (TD/ SMP) terminal, refer to the Network Access
Software Management Guide.
Step Action
1 Verify the service node. See the section Verify Nodes That Offer the Service (Chapter
2).
2 Use the SET/DEFINE/CHANGE SERVICE QUEUE ENABLED command to enable
queuing on the service.
3 Verify the access server memory usage. See the section Verify Service Rating (Chapter
2).
4 Verify the LAT group codes. See the section Verify LAT Group Codess
(Chapter 2).