Installation guide

26-1
Chapter 26
Messages 900 – 999
Overview
Introduction
This chapter provides information on messages 900 – 999. These messages appear only on
the console port and under the following circumstances:
• When the access server is initialized.
• When the access server crashes.
Messages
Local -901- Initializing DECserver ppppp address FW Vx.x-x HW x.x
or
Local -901- Initializing Access Server ppp address FW Vx.x-x HW x.x
Explanation: In message 901, ppppp or ppp is the platform code of the access server
device. The number of ports is encoded in the last two digits of the platform code, with the
exception of the 900 series. The address field is the Ethernet address. This message is
generated approximately 10 seconds after powering up the access server or after executing
the INITIALIZE command. Message 901 displays the following information:
• Ethernet address of the access server
• Base level of the internal ROM firmware
• Current hardware revision level
Action: No user action is required.