Installation guide

Software Installation Problems
1-10
Ensure the Access Server Software Image File Name
Is Defined Correctly
For an OpenVMS load host:
Problem: The following message appears on the load host console:
%%%%%%%%%%% OPCOM 29-NOV-2000 11:55:18 %%%%%%%%%%%
Message from user DECNET on SATRN
DECnet event 0.7, aborted service request
From node 12.467 (SATRN),
29-NOV-2000 11:55:18
Circuit BNA-0, Line open error, File open error, Load file
%MOM-E-OPENIN, error opening
SYS$COMMON:[DECSERVER]WWENG2.SYS; as input
-RMS-E-FNF, file not found
Node = 13.997 (GEMNI), Ethernet address = 08-00-2B-08-27-57
Explanation: The access server software image file does not exist on the load host.
Action: Verify the software location and file specification. See the section Verify the
Software Location and File Name (page 2-4).