Switch User's Guide

CSX400 Configuration with QuickSET
CSX400 and CSX400-DC User’s Guide 93
Wide Area HDSL Configuration Window
The Wide Area HDSL configuration window shown in Figure 32 displays after clicking on the
N
ext>> button in the Ethernet 1 and 2 configuration window or the PPP-HDSL configuration
window.
This section explains how to configure the CSX400 Wide Area HDSL interface using QuickSET.
Figure 32 Wide Area HDSL Configuration Window
NOTE
The wiring provider (i.e., Internet Service Provider (ISP) contractor, etc.) determines
the settings for Table 18. Consult the service provider for the correct settings.