Switch User's Guide

CSX400 Configuration with QuickSET
CSX400 and CSX400-DC User’s Guide 95
Wide Area Frame Relay Time Slot Configuration Window
The Wide Area Frame Relay Time Slot configuration window shown in Figure 33 displays when
you click on the N
ext>> button in the Wide Area T1, E1, or DI configuration windows when
Frame Relay is chosen as the WAN Protocol.
Figure 33 Wide Area Frame Relay Time Slot Configuration Window
The following section defines the fields in the Wide Area Frame Relay Time Slot configuration
window.
Time Slots — A full line consists of 24 Time Slots (T1 and DI) or 31 Time Slots (E1), each
capable of up to 64 Kbps throughput. If you are leasing an entire line from your service provider,
you may select all the Time Slots by clicking the Select A
ll button. A “check mark” displays in the
selected box. If you have leased a portion of a fractional T1 or E1 line, the service provider tells
you which Time Slots are allocated for your use. In this case, select only those Time Slots.