Switch User's Guide

CSX400 Configuration with QuickSET
106 CSX400 and CSX400-DC User’s Guide
To change the WAN Frame Type information, scroll through the list of interface entries, and select
the interface number you wish to modify by pressing the arrow button on the left side of the
Interface # field and press the M
odify... button. The WAN Frame Type window displays.
The WAN Frame Type window shown in Figure 39 allows you to select one of three frame types
to be used over the WAN for each interface: Native WAN, Encapsulated Ethernet, and
Encapsulated Ethernet SNAP. Select the WAN Frame Type that you wish to enable by clicking the
appropriate radio button. When you are done, click the O
K button. The OK button returns you to
the Bridging and Routing (WAN Frame Type) configuration window.
Figure 39 WAN Frame Type Configuration Window
Once the Bridging and Routing (WAN Frame Type) configuration is complete, click on the
N
ext>> button, and go to the Routing Configuration Window section.