Switch User's Guide

CSX400 Configuration with QuickSET

110 CSX400 and CSX400-DC User’s Guide

Remote MAC Address — Displays the remote Ethernet MAC address. Use this ﬁeld to enter the

remote MAC address of the device on the other end of the WAN link.

Apply Changes — Use this button to add the conﬁgured Host Map entry to the IPX Host Map

list.

Add Host/Delete Host — These buttons allow you to add or delete a host and to conﬁgure the

CSX400 to forward only those packets from the speciﬁed host. Use these buttons to add or delete

an entry in the Host Map.

When you have ﬁnished making changes, click on the Ap

ply Changes button. Click the OK

button to exit the Host Map window and return to the (IP/IPX) Routing Conﬁguration window.

Once your CSX400 conﬁguration is complete, click on the Save button to save any conﬁguration

changes you have made. The Congratulations window displays. Click on the O

K button to exit

QuickSET.