Switch User's Guide

General Configuration Using Local Management
128 CSX400 and CSX400-DC User’s Guide
The following list explains each of the basic Local Management screen fields:
Event Message Field — This field briefly displays messages that indicate if a Local
Management procedure was executed correctly or incorrectly, that changes were saved or not
saved to Non-Volatile Random Access Memory (NVRAM), or that a user did not have access
privileges to an application.
Table 21 describes the most common event messages. Event messages related to specific Local
Management applications are described with those applications throughout this manual.
Display Fields — Display fields cannot be edited. These fields may display information which
never changes, or changes as the result of Local Management operations, user selections, or
network monitoring information.
Input Fields — Input fields require keyboard characters to be entered. IP addresses, System Date,
and System Time are examples of Input fields.
Selection Fields — Selection fields provide a series of possible values. Only applicable values
appear in Selection fields.
Command Fields — Command fields are located at the bottom of Local Management screens.
Command fields are used to exit Local Management screens and to save Local Management
entries. Command fields perform a management action simply by being selected and activated.
Only command fields can make a change to a device’s configuration.
Table 21 Event Messages
Message Meaning
SAVED OK One or more fields were modified,
and saved to NVRAM.
NOT SAVED?--PRESS SAVE TO
KEEP CHANGES
One or more fields were modified,
but not yet saved to NVRAM.
NOTHING TO SAVE The SAVE command was executed,
but nothing was saved to NVRAM.