Switch User's Guide

General Configuration Using Local Management
130 CSX400 and CSX400-DC User’s Guide
Navigating Within Local Management Screens
To navigate within a Local Management screen, use the arrow keys of the terminal or the
workstation providing terminal emulation services. The Local Management screen cursor
responds to the LEFT-ARROW, RIGHT-ARROW, UP-ARROW, and DOWN-ARROW keys. Each
time you press an arrow key, the Local Management screen cursor moves to the next available field
in the direction of the arrow key.
The Local Management screen cursor only moves to fields which can be selected or used for input.
This means that the cursor jumps over display fields and empty lines on the Local Management
screen.
The Local Management screen cursor provides wrap-around operation. This means that a cursor
located at the edge of a screen, when moved in the direction of that edge, “wraps around” to the
outermost selectable item on the opposite side of the screen which is on the same line or column.
Selecting Local Management Menu Screen Items
To select items in a Local Management menu screen, perform the following steps:
1. Use the arrow keys to highlight a menu item.
2. Press ENTER. The selected Local Management menu screen displays.
Exiting Local Management Screens
To exit any of the Local Management screens, perform the following steps:
1. Use the arrow keys to highlight the RETURN command at the bottom of the Local
Management screen.
2. Press ENTER. The previous screen in the Local Management hierarchy displays.
Exiting the Local Management Session
To exit from CSX400 Local Management, perform the following steps:
1. Use the arrow keys to highlight the RETURN command at the bottom of the Local
Management screen.
2. Press ENTER. The previous screen in the Local Management hierarchy displays.
NOTE
You can also exit Local Management screens by pressing ESC twice. This exit method
does not warn you about unsaved changes and all unsaved changes are lost.