Switch User's Guide

Introduction
2 CSX400 and CSX400-DC User’s Guide
Chapter 3 , ISDN Line Ordering and Configuration , provides the information you need to order
ISDN service from the telephone company.
Chapter 4 , Planning for CSX400 ISDN Configuration , describes the router configuration
process.
Chapter 5 , Ethernet Cabling Requirements , describes the basic cabling requirements for an
Ethernet Local Area Network (LAN).
Chapter 6 , Installation , provides detailed installation instructions for attaching the CSX400 and
CSX400-DC to a network.
Chapter 7 , CSX400 Configuration with QuickSET , provides instructions on connecting the
CSX400 to a Wide Area Network (WAN) using Cabletron Systems
QuickSET management utility.
Chapter 8 , General Configuration Using Local Management , provides instructions for
configuring the CSX400 through a TELNET connection.
Chapter 9 , MIB Navigator , explains how to use the MIB Navigator utility.
Chapter 10 , Troubleshooting , provides detailed troubleshooting tips using the LANVIEW LEDs
on the CSX400.
Appendix A , EPIM Specifications , provides hardware specifications and pinout information for
available Cabletron Systems Ethernet Port Interface Modules (EPIMs).
Appendix B , WPIM Cable Specifications , provides part number and connector information for
WPIMs.
Appendix C , Specifications and Standards Compliance , contains hardware specifications and
safety and compliance standards for the CSX400.
Appendix D , Network Information Worksheets , provides blank network information
worksheets.
Appendix E , FCC Part 68 - User’s Information For CSX400 and CSX400-DC , provides
instructions required to comply with FCC Rules, Part 68.
Appendix F , Glossary , defines commonly used terms.