Switch User's Guide

General Configuration Using Local Management
146 CSX400 and CSX400-DC User’s Guide
• Reboot After Download — This field displays when the RUNTIME Download Method is
chosen. Selecting YES forces the CSX400 to reboot and use the new firmware image
immediately. Selecting NO allows the CSX400 to continue using the existing firmware image
without interrupting network operation.
• Commit to Flash — This field displays when the BOOTPROM Download Method is chosen.
Selecting YES allows the CSX400 to continue using the existing firmware image without
interrupting network operation and selecting NO allows the CSX400 to reboot and use the new
firmware image immediately.
• TFTP Gateway Server IP — This field displays when the BOOTPROM Download Method
is chosen. Use this field to enter the IP address of the TFTP Gateway Server.
Last Image Server IP — Displays the IP address of the last server used to download a firmware
image to the CSX400.
Last Image File Name — Displays the file name of the last firmware image downloaded to the
CSX400.
Download Server IP — Use this field to type in the IP address of the server from which you wish
to download the firmware image.
Download File Name — Use this field to type in the file name of the firmware image you wish to
download to the CSX400.
Selecting a Flash Download Method
1. Use the arrow keys to highlight the Download Method field.
2. Press the SPACE bar or BACKSPACE to select a flash download method.
• If you select RUNTIME, the Reboot After Download field displays.
• If you select BOOTPROM, the Commit to Flash field and the TFTP Gateway Server IP
field display.