Switch User's Guide

General Configuration Using Local Management
CSX400 and CSX400-DC User’s Guide 163
IPX General Configuration Screen
The IPX General Configuration screen allows you to configure the CSX400 for IPX routing.
Access the IPX General Configuration screen by using the arrow keys to highlight the IPX
General Config menu item and pressing ENTER. The IPX General Configuration screen shown
in Figure 69 displays.
Figure 69 IPX General Configuration Screen
IPX General Configuration Status Fields
The following list describes each of the IPX General Config status fields. The status fields are for
informational purposes only and cannot be modified.
Router Name — Displays the type of routing used.
Status — Displays the status of IP Routing.
UpTime — Displays the amount of time elapsed since the last time the CSX400 was rebooted.
Version — The version number of the IP Routing used on the CSX400.
Router Name: IPX
IPX Routing:ENABLED
UpTime: 0 days 0 hours 39 min
SAVE RETURN
IPX General Configuration
Version: XX.XX.XX
Status: Enabled
AdminStatusTime: 0 days 0 hours 39 min
System Level Setup
Port Level Setup
Port: 1
MAC Address: 00-00-1D-22-46-B0
Oper Status: Enabled
Description: Ctron CSX400 EnetPort
Interf. Type: ethernet-csmacd
Framing: Novell
MTU: 1500
IPX Address: 0.0.0.0
IPX Forwarding: DISABLED
+PORT-
IPX Routing: DISABLED
CSX400 Local Management Flash Image Version XX.XX.XX