Switch User's Guide

MIB Navigator
CSX400 and CSX400-DC User’s Guide 181
MIB Navigation Commands are listed in the format shown below:
command:
Syntax: This entry provides the format that the MIB Navigator command
requires. It indicates where arguments, if any, must be specified.
Description: This entry briefly describes the command and its uses.
Options: This entry lists any additional fields which may be added to the
command and their format.
Example: This entry shows an example of the command.
Navigation Commands
The following MIB Navigation commands allow you to move from MIB object to MIB object
within the MIB tree.
branch:
Syntax: branch [path]
Description: The branch command displays all of the leaves in the MIB tree below a
specified path. The information displayed includes the pathname, the
object ASCII name, the type of object (i.e., integer, counter, time tick,
etc.), and the current value of each leaf object.
Options: Not Applicable
Example:
MIBNav-> branch
# /1/3/6/1/2/1/7/1
# /1/3/6/1/2/1/7/2
# /1/3/6/1/2/1/7/3
udpInDatagrams
udpNoPorts
udpInErrors
COUNTER
COUNTER
COUNTER
38216
0
0
051456