Switch User's Guide

MIB Navigator
202 CSX400 and CSX400-DC User’s Guide
imux:
Syntax: imux <options>
Description: This function lets you balance your LAN traffic between two T1 WAN
ports and is used with Point to Point Protocol (PPP). When you select
Inverse Multiplexing via QuickSET, bridging, IP routing, and IPX
routing functions are all disabled. The WAN device at the other end of
the WAN link(s) must be a Cabletron Systems device, capable of
receiving the balanced WAN traffic. The imux command with no options
displays the status information.
Options: -ea enables the Inverse Multiplexer Application.
-da disables the Inverse Multiplexer Application.
-eg <GROUPID> enables the Inverse Multiplexer group designated by
<GROUPID>.
-dg <GROUPID> disables the Inverse Multiplexer group designated by
<GROUPID>.
-ac <GROUPID> <INTERFACENUM> Adds the WAN channel
designated by <INTERFACENUM> to the Inverse Multiplexer group
designated by <GROUPID>.
-dc <GROUPID> <INTERFACENUM> Deletes the WAN channel
designated by <INTERFACENUM> from the Inverse Multiplexer group
designated by <GROUPID>.
<GROUPID> A unique value identifying an element in a sequence of
groups which belong to the WAN Inverse Multiplexer Application.
<INTERFACENUM> The MIB II ifIndex value used to represent a
WAN channel that has an appropriate datalink protocol associated with
it.
Example:
MIBNav-> imux
------------------------------------------------------------------------------------------------------------------------------------
WAN Inverse Multiplexer Status:
Number of WAN Inverse Multiplexer Groups currenly programmed: 1
Number of WAN Inverse Multiplexer Channels currenly programmed: 2
Group ID
1
1
Channel ID
2
1
2
1
1536000
1536000
291483387
292249652
(Kbits/sec)
Available BW
Physical Number
WAN
(bytes)
Xmit Byte Count
imux