Switch User's Guide

CSX400 and CSX400-DC User’s Guide 223

WPIM Cable Speciﬁcations

WPIM-T1

This section provides the Cabletron Systems part number and connector speciﬁcations for

WPIM-T1 interface cables.

Table 33 provides connector type and part number information.

Table 34 provides RJ48 connector pin assignments.

NOTE

For all WPIM cables, there is part number information for ordering a standard 20-foot

cable or a speciﬁed length of cable. The number 20 followed by the part number

denotes the standard 20-foot cable. The letter “L” denotes the speciﬁed length required

in feet or meters. For example: 9372095-3 denotes a 3 foot cable; 9372095-3M

denotes a 3-meter cable.

Table 33 T-1 Interface Cable Part Numbers

Connector Type Part Number

RJ48C 9372094

Table 34 T-1 Connector Pin Assignments

Pin Signal

1 Receive Ring

2 Receive Tip

3 Not Used

4 Transmit Ring

5 Transmit Tip

6 Not Used

7 Shield Ground

8 Shield Ground