Switch User's Guide

About the CSX400

CSX400 and CSX400-DC User’s Guide 19

read-write — This access level allows editing of some device conﬁguration parameters not

including changing system passwords.

super-user — This access level allows full management privileges. At this level you must access

the CSX400 to run QuickSET.

Simple Network Management Protocol (SNMP)

The CSX400 provides SNMP agent support for the following: standard and Enterprise Speciﬁc

Management Information Bases (MIBs), and support for standard and Enterprise Speciﬁc SNMP

Traps. SNMP is also used internally for conﬁguration of the CSX400. The active SNMP agent

within the CSX400 accepts SNMP requests for status, statistics and conﬁguration updates.

Communication with the SNMP agent occurs over the LAN or WAN connection. Any

management application using SNMP over UDP/IP has access to the local SNMP agent.

SNMP MIB Support

SNMP MIBs are databases of objects used for managing and determining the status and

conﬁguration of an SNMP compliant device.

The following SNMP MIBs are supported by the CSX400:

• MIB IIRFC1213

• RMON MIBRFC1271

• DS1 and E1 MIBRFC1406(Digital Signal Level 1 [T1/E1 interface types])

• IETF Bridge MIBRFC1493

• IP Forwarding MIB RFC1354

• PPP LCP MIBRFC1471(Point-to-Point Protocol, Link Control Protocol)

• PPP IPCP MIBRFC1473(IP Control Protocol)

• PPP BNCP MIBRFC1474(Bridge Network Control Protocol)

• IPXCP MIBRFC1552

• Frame Relay DTE MIBRFC1490

• Security MIBRFC1472(CCP, PAP, and CHAP)

• RS-232 MIBRFC1317

• LQM MIBRFC1989

• PPP MP MIBRFC1990