Switch User's Guide

CSX400 Configuration with QuickSET
72 CSX400 and CSX400-DC User’s Guide
Enter the IP address of the CSX400 in the appropriate field and the password if applicable (the
default password is public). Click on the O
K button and QuickSET locates the CSX400 on the
network and displays the First Introductory window shown in Figure 22.
Figure 22 First Introductory Window
Click on the Next>> button to continue the CSX400 configuration, and the Second Introductory
window shown in Figure 23 displays.
NOTE
The QuickSET version number shown on each window in this chapter may not reflect
the QuickSET version number running on your system.