Switch User's Guide

CSX400 Configuration with QuickSET
74 CSX400 and CSX400-DC User’s Guide
Ethernet Configuration
This section explains how to configure the CSX400 Ethernet 1 and 2 fields using QuickSET.
Ethernet 1 and 2 Configuration Window
The Ethernet 1 and 2 configuration window, shown in Figure 24, displays after clicking on the
N
ext>> button in the Second Introductory window. The Local Ethernet IP address and Subnet
Mask fields shown on the Ethernet 1 and 2 configuration window are used for setting an IP address
and Subnet Mask.
Figure 24 Ethernet 1 and 2 Configuration Window