Specifications

Device Management Page 12 SmartSwitch Router/X-Pedition Switch Router
Device Views Interface Device View
Interface Icons
This section describes the icons that represent
the front panel interfaces on the SmartSwitch
Router line modules. Figure 4 shows the interface
icon and its labels/double-click zones.
Figure 4: Interface Icon
Port Number Label
This label identifies this port. The number
represents the port number on this module.
Sub-Interfaces Button
This button appears on an Interface icon when
the interface model has sub-interfaces associated
with it. Examples include a physical ATM
interface with Permanent Virtual Circuits (PVCs)
provisioned on it or a physical Frame Relay
interface with DCL circuits on it. The endpoints of
these multiplexed connections are modeled by
SPECTRUM as sub-interfaces. Double-click this
button to access the Sub-Interfaces Topology View
(Page 21).
Administrative Status Label
This label displays the administrative state of this
port. It also provides double-click access to the IF
Status (Page 14) view.
Table 4 lists the possible states relative to the
application selected. The default application for
this view is Physical (MIB-II). To select the
application to be displayed (Physical or Bridging),
click the Filter menu button in the Interface
Options panel.
(a)
(b)
(c)
(d)
(e)
(f)
a Port Number Label
b Administrative Status Label
c Interface Type Label
d Interface Description Label
e Physical Address Label
f IP Address Label
1
OFF
ethernet
0:0:C6:FF:0:41
0:0:0:0
et.2.1
Sub-Interfaces Button