Specifications

Device Management Page 14 SmartSwitch Router/X-Pedition Switch Router
Device Views Interface Device View
Interface Label Icon Subviews
Menu
Table 5 lists each of the Icon Subviews menu
selections available for the Interface Label.
Interface Status View
Access: From the Icon Subviews menu for the Interface
icon in the Interface Device view, select IF Status.
The Interface Status view provides the following
information on the status of the interface:
Operational Status
Displays the current operational state of the
interface is displayed (Up, Down, Testing, or
Unknown).
Allows you to select the desired operational state
of the interface (On, Off, or Testing).
Secondary Address Panel
Access: From the Icon Subviews menu for the Interface
icon in the Interface Device view, select Secondary
Address Panel.
This panel provides a table of IP addresses and
masks obtained from the Address Translation
Table within the device’s firmware. You can
change the current address displayed in the IP
Address field by selecting an entry from the table
in this panel and clicking the Update button.
Table 5: Interface Label Icon Subviews Menu
Option Opens the ...
IF Details Interface breakdown detail view
displays three pie charts of packet,
error, and discard information See
SPECTRUM Views for more details.
IF Status Interface Status View allows you to set
the operational status (turn the port on
or off) through the Administrative
Status button.
IF Configuration Interface Configuration View (Page 34)
provides interface specific
configuration information.
Secondary
Address Panel
Secondary Address Panel displays the
current IP address for this interface.
IF Thresholds Interface Threshold view, which lets
you set the on/off alarm thresholds for
load, packet rate, error rate, and %
discarded for the interface.
Model
Information
Model Information View (Page 48) for
this interface.
Administrative Status