Specifications

Device Management Page 18 SmartSwitch Router/X-Pedition Switch Router
Device Views Chassis Device View for the 6-SSRM-02
Line Module Icon Subviews Menu
Table 6 describes each of the device-specific Icon
Subviews menu options available for the Line
Module.
Chassis Device View for the
6-SSRM-02
Access: From the Icon Subviews menu for the
6-SSRM-02, select Device > Chassis.
This view displays the Chassis Information for the
6-SSRM-02 device:
Power Redundancy
Displays the source of power for the chassis.
Redundant indicates that power from the
secondary source is being used for the chassis.
NON_redundant indicates that power from the
primary source is being used.
PS #1 Status
The status for power supply one.
PS #2 Status
The status for power supply two.
Table 6: Line Module Icon Subviews Menu
Option Opens the ...
Sub-Interfaces Sub-Interfaces views which displays a
the selected inface icon in the chassis.
IF Performance IF Performance View (Page 33).
IF Details Interface breakdown detail view which
displays three pie charts of packet,
error, and discard information
described in detail in the SPECTRUM
Views documentation.
IF Status Interface Status View (Page 14) allows
you to set the operational status (turn
the port on or off) through the
Administrative Status button.
IF Configuration Interface Configuration View (Page 34)
provides interface specific
configuration information.
Network
Information Panel
Network Information Panel.
IF Thresholds Interface Threshold View allows you
to view and set the thresholds for this
interface.
Model Information Model Information View (Page 48) for
this interface.
Table 6: Line Module Icon Subviews Menu