Specifications

Device Management Page 20 SmartSwitch Router/X-Pedition Switch Router
Device Topology Views
This section provides brief descriptions of the Device Topology views available for models of SmartSwitch
Router devices in SPECTRUM.
Device Topology views show the connections
between a modeled device and other network
entities. The SmartSwitch Router has two Device
Topology views:
• Chassis Device Topology View
• Interface Device Topology View
Chassis Device Topology View
Access: From the Icon Subviews menu for the Device
icon, select DevTop > Chassis.
Figure 7 shows an example of the Chassis Device
Topology view. The lower panel of the view uses
Interface icons to represent the device’s serial/
network I/O ports for a selected module. The port
labels in this view provide the same information
and menu options as those described under the
Interface Icons (Page 12).
Interface Device Topology
View
Access: From the Icon Subviews menu for the Device
icon, select DevTop > Interface.
The lower panel of the Interface Device Topology
view (Figure 7) uses interface icons to represent
the device’s serial/network I/O ports. These icons
provide the same information and menu options
as those in the Interface Device View (Page 11). If
there is a device connected to a particular
interface, a device icon appears on the vertical bar
above the interface icon with an icon representing
the network group that contains the device.
For further information on Device Topology views,
refer to SPECTRUM Views.