Specifications

Device Management Page 35 SmartSwitch Router/X-Pedition Switch Router
Configuration Views Capacity Application Configuration View
Operation Status
The current operational state of the interface.
Valid values are: Up, Down, or Testing.
The desired operational state of the interface.
Valid values are: Up, Down, On, or Testing.
Last Change
The sysUpTime value when the interface entered
its current operational state.
PhysAddress
The Ethernet (MAC) address of the interface.
Bandwidth
The estimated bandwidth of the interface,
measured in bits per second. For interfaces that
do not vary in bandwidth, or when no accurate
estimate can be made, a nominal bandwidth is
provided.
Packet Size
The largest packet that can be transmitted or
received by the port, displayed in octets.
Queue Length
The length of the outbound packet queue, in
packets.
Capacity Application
Configuration View
Access: From the Icon Subviews menu for the
CapacityApp Application icon, select Configuration.
This view displays the following information:
Slot Count
The maximum number of slots in the chassis,
including the slot for the CPU module.
Slots Used
The number of slots used in the chassis. This
number includes the slot used for the CPU
module, if any.
Slots Free
The number of free slots in the chassis. This
includes all of the available slots not used by the
CPU or redundant CPU card.
CPU Redundancy
The chassis CPU redundancy capability of the
SSR. Valid values are: noSupport, available,
enabled, and disabled.
PS Redundancy
The chassis Power Supply redundancy capability
of the SSR. Valid values are: noSupport,
available, enabled, and disabled.
Admin. Status