Specifications

Device Management Page 36 SmartSwitch Router/X-Pedition Switch Router
Configuration Views Capacity Application Configuration View
SF Redundancy
The chassis Switching Fabric redundancy
capability of the SSR. Valid values are:
noSupport, available, enabled, and disabled.
Opens the Capacity - Memory Table View
(Page 36).
Opens the Capacity - CPU Table View (Page 37).
Task Table
A summary of the tasks running on a CPU
enabled module in the chassis. Column headings
are as follows:
Task
A unique index assigned to a task instance. This
index is unique to the task for the time SSR is
booted. If the task is terminated, the index will
not be reused for another task that might become
active in the system.
Name
The encrypted name assigned to this task. This is
unique for each different type of task, but there
may be multiple instances of the same task
running in the system.
Sched
The number of times this task has been
scheduled to run. This is a cumulative count from
the time the SSR was started.
Status
The current status of this task.
MemUsed
The size of the memory consumed by this task.
This can be used to monitor any excess memory
used by a particular task and is expressed in
bytes.
Capacity - Memory Table View
Access: From the Capacity Application Configuration
View, click on the Memory Table button.
A summary of the non-volatile storage devices in
the SSR. Column headings are as follows:
Index
An index or enumeration for the entries of a
particular memory type. This corresponds to:
• Interface index for L2Hardware Type
• Module index for L3Hardware Type
• Enumeration for everything else.
Description
The description of the memory device.
Memory Table
CPU Table