Specifications

Device Management Page 37 SmartSwitch Router/X-Pedition Switch Router
Configuration Views Capacity Application Configuration View
Size
Memory device total memory capacity expressed
in blocks.
Free
Device free memory in blocks. This will include
any unused memory between used memory
blocks and is calculated by subtracting the
memory used from the size of the memory device.
Used
Size of used memory on the memory device. This
includes the blocks of memory that are only
partially used and is expressed in blocks.
BlockSize
Size of the memory blocks on the memory device.
This is the minimum block size of memory
returned when memory is requested and is
expressed in bytes.
Failures
The number of times a memory allocation in this
memory device has failed. In the case of
L2Hardware and L3Hardware types it expresses
the number of times a Full Hash Bucket condition
has been met.
Removable
Indicates if the memory type is removable. Valid
values are: yes and no.
Capacity - CPU Table View
Access: From the Capacity Application Configuration
View, click on the CPU Table button.
Summary of CPU statistics. It is assumed that
there is only one CPU per line card.Index. This
view displays the following information:
Index
The slot index in which the current CPU is
residing.
CurrUtil
The CPU utilization expressed as an integer
percentage. This is calculated over the last 5
seconds at a 0.1 second interval as an average.
L3Learned
The total number of new layer 3 (L3) flows the
CPU has processed and programmed into the L3
hardware flow tables. L3 flows are packets for IP
or IPX protocols that will be routed from one
subnet to another. Bridged flows or IP and IPX
flows that originate and terminate in the same
subnet are accounted for by L2Learned.
L3Aged
The total number of L3 flows that have been
removed from the L3 hardware flow tables across
all modules by the L3 aging task. This number
may increase quickly if routing protocols are not