Specifications

Device Management Page 38 SmartSwitch Router/X-Pedition Switch Router
Configuration Views SmartSwitch Router Configuration View
stable. Removal or insertion of routes into the
forwarding table will cause premature aging of
flows. Flows are normally aged/removed from the
hardware when there are no more packets being
sent for a defined time period. This counter is
cumulative from the time the system started.
L2Learned
The number of Layer 2 (L2) flows or addresses
learned. The intended result here is to see how
many stations attempt to establish switched
communication through the SSR.
L2Aged
The total number of L2 addresses or flows aged
out. Hosts that end switched communication
through the SSR are aged out every 15 seconds.
NIA-rcvd
The total number of packets received by the NIA
chip. This is useful in gauging how many packets
are forwarded to the CPU for processing.
NIA-txd
The total number of packets transmitted by the
NIA chip. This is useful in seeing how much the
CPU is communicating directory with
management stations and other routers.
SmartSwitch Router
Configuration View
Access: From the Icon Subviews menu for the Device
icon, select Configuration.
Contact Status
The contact status of the model.
Number of Interfaces
The number of interfaces on the model.
Opens the Redundancy and Model Reconfiguration
Options View (Page 39).
Opens the Interface Address Translation Table
(Page 41).
Opens the SmartSwitch Router TFTP View
(Page 41).
Interface Configuration Table
Double-clicking on an entry in this view opens the
Interface Configuration View. This view provides
the same information as the Interface
Redundancy and Model
Reconfiguration Options
IP IF Address Translation
TFTP Configuration