Specifications

Device Management Page 41 SmartSwitch Router/X-Pedition Switch Router
Configuration Views SmartSwitch Router Configuration View
Clicking this button will cause SPECTRUM to
verify and change the interfaces displayed for this
device when necessary. If the Topologically
Relocate the Model button is set to True, this
button will also execute a device discovery.
Clicking this button will cause SPECTRUM to
execute a device discovery on this devices
connections.
Interface Address Translation
Table
Access: From the SmartSwitch Router Configuration
view, click on the IP IF Address Translation button.
This table provides the physical and network
addresses associated with the interface index.
Interface Index
A pointer to the entry in the Interface Table
corresponding to this port.
Physical Address
The Ethernet (MAC) address of the interface.
Network Address
The IP Address of the interface.
SmartSwitch Router TFTP View
Access: From the SmartSwitch Router Configuration
View, click on the TFTP Configuration button.
This view allows you to manage SmartSwitch
Router configuration files and perform file
transfers to and from the manager and agent.
Column headings are as follows:
Manager Address
Displays the address for the manager used by the
agent for CFG transfer operations. The value
0.0.0.0 is the default. The address must be a
unicast address that is reachable from the agent.
File Name
Displays the file name to be retrieved from the tftp
server at the host manager address or the file
name to be written to. The default is blank.
Transfer Operation
Displays the transfer operation to be performed.
Send and receive operations use tftp to transfer
files from the manager to the agent. Table 8 lists
possible operations:
Reconfigure Model
Discover LANs
Transfer Operation