Specifications

Device Management Page 47 SmartSwitch Router/X-Pedition Switch Router
Configuration Views Policy Configuration View
Router
The IP Address of the next hop router flow will be
sent to.
State
The current status of the Router. If no entry
found when a policy route is activated, then arp
for the request the state will be waitingForArp. If
a reply is found the state will go to macAquired
else noArpReply. If NextHop is not local, mac is
actual nexthop router.
ExitPort
IfIndex of port we learned this router on or else
zero if not known.
Next Hop MAC Addr
MAC Address of next hop router learned from
ARP.
Flow Control Table
This table displays the following information:
Type
Controls if packets are forwarded or not for this
policy.
Action
Defines when this policy should be used during
normal packet forwarding process. The default
value is policyBeforeRouteLookup.
Up to twenty separate ACLs may be defined to
match for this policy.
Match
This field is mandatory. Use active row from
polAclTable.
This button is enabled when
polL4lowControlTableActivates is supported by
the device. The view shows the values of
attributes polL4FlowControlTableActivates,
polL4FlowControlTableActivateFails,
polL4lowArpMappingChanges, and
polL4lowLostRouters.
Additional