Specifications

9032231 E1 Device Views
2-7
Chassis Device View
Device Icon Labels
Application Label
This label provides access to the Icon Subviews menu for the application
displayed (see Figure 2-3). Double-click the Application label to open the
System Configuration - IP Routing view described in the Routing Services
Management Module Guide. The application selected determines the
information displayed and the menu selections available. To select the
application, highlight the Device icon and from the View menu, select Icon
Subviews -> Application Display.
Table 2-3 lists the device-specific Bridging Application Icon Subviews menu
selections. Table 2-4 lists the Router Application Icon Subviews menu
selections. See Chapter 1, Introduction, for information on Accessing
SPECTRUM Views. The Physical Application has no specific Icon Subviews
menu selections.
Module Notes Opens a dialog box in which you can record notes if you have
write permission for the model.
Application Display Opens the Application Display submenu, allowing you to
choose Physical (MIB II), Bridging, or one of the following
router applications described in the Routing Services
Management Module Guide: CtRouter, IP Routing, IP RIP,
IPX Routing, IPX RIP, IPX SAP.
Table 2-2. Device Icon Subviews Menu (Continued)
Table 2-3. Bridging Application Icon Subviews Menu
Menu Selection Description
Bridge Performance Opens the Bridge Performance view described in the
Operator’s Reference.
Bridge Detail Opens the Bridge Detail view described in the
Operator’s Reference
.
Bridge Model Information Opens the Model Information view described in the
Operator’s Reference.
Special Database Opens the Ethernet Special Database Table with
Filter Information Table.
Spanning Tree Information Opens the Spanning Tree Information view described
in the Application View Reference.
Static Database Table Opens the Static Database Table view described in
the Application View Reference.
Transparent Bridge Info Opens the Transparent Bridge Information view with
Forwarding Database and Port Tables described in
the Application View Reference.