Specifications

9032231 E1 Configuration Views
3-3
Device Configuration View
Interface Configuration Table
Interface Configuration Table
This table within the Device Configuration view provides the following
configuration information for the device and each interface:
Number of Interfaces
Displays the number of interfaces available for this device.
Index
Displays the interface number.
Description
Displays a description of the interface.
Type
Displays the type of hardware interface for the port.
Bandwidth
Displays the estimated bandwidth of the interface measured in bits per
second. For interfaces that do not vary in bandwidth or when no accurate
estimate can be made, displays a nominal bandwidth.
Physical Address
Displays the MAC (physical) address of the port.
Operation Status
Displays the current operational state of this port. Possible values are: On,
Off, Test.
Admin Status
This menu button allows you to enable or disable the port or place it in test
mode. Possible selections are: On (Enable), Off (Disable), Test (Testing mode).
Last Change
Displays the System uptime value when the interface entered its current
operational state.The format is as follows: D + HH:MM:SS. For example, 1 +
20:40:25 indicates that the CyberSWITCH device has been active for one day
and 20 hours, 40 minutes and 25 seconds.
Queue Length
Displays the length of the outbound packet queue, in packets.
Packet Size
Displays the largest packet that can be transmitted or received by the port,
measured in octets.