Specifications

9032231 E1 Event and Alarm Messages
4-11
CyberSWITCH 200 Series and 400 Events and Alarms
CsEvFormat/Event000d0137
{d “%w- %d %m-, %Y - %T”} Alternate
Path Repeater Management has been
enabled for {m} of type {t} Network
Address Synchronized to {O 1}. -
(event [{e}])
CsPCause/Prob000d0137
ALTERNATE PATH REPEATER
MANAGEMENT HAS BEEN ENABLED
PROBABLE CAUSE:
Alternate Path Repeater Management
functionality has been enabled for this
repeater model.
RECOMMENDED ACTIONS:
1) Check event log to obtain newly
synchronized Network address.
2) If repeater model is not associated with
a routing device this functionality should
be disabled.
CsEvFormat/Event000d0138
{d “%w- %d %m-, %Y - %T”} Alternate
Path Repeater Management has been
enabled for {m} of type {t} No Network
Address Synchronization. - (event
[{e}])
CsPCause/Prob000d0138
ALTERNATE PATH REPEATER
MANAGEMENT HAS BEEN ENABLED
PROBABLE CAUSE:
Alternate Path Repeater Management
functionality has been enabled for this
repeater model.
RECOMMENDED ACTIONS:
Check the device’s network address. The
repeater model was unable to synchronize
to the device’s network address.
Table 4-1. CyberSWITCH 200 Series and 400 Events and Alarms (Continued)
Message in the Event Log
Alarm Manager Probable Cause
Message