Specifications

CyberSWITCH 200 Series and 400 Events and Alarms
Event and Alarm Messages CyberSWITCH Devices (200 Series and 400)
4-12 Management Module Guide
CsEvFormat/Event000d0139
{d “%w- %d %m-, %Y - %T”} Alternate
Path Repeater Management has been
disabled for {m} of type {t} Network
Address Synchronized to {O 1}. -
(event [{e}])
CsPCause/Prob000d0139
ALTERNATE PATH REPEATER
MANAGEMENT HAS BEEN DISABLED
PROBABLE CAUSE:
Alternate Path Repeater Management
functionality has been disabled for this
repeater model.
RECOMMENDED ACTIONS:
1) If associated with a routing device, re-
enable functionality to provide
management path redundancy.
2) Make sure the newly synchronized
network address is accessible.
CsEvFormat/Event000d013a
{d “%w- %d %m-, %Y - %T”} Alternate
Path Repeater Management has been
disabled for {m} of type {t} No Network
Address Synchronization. - (event
[{e}])
CsPCause/Prob000d013a
ALTERNATE PATH REPEATER
MANAGEMENT HAS BEEN DISABLED
PROBABLE CAUSE:
Alternate Path Repeater Management
functionality has been disabled for this
repeater model.
RECOMMENDED ACTIONS:
1) If associated with a routing device re-
enable functionality to provide
management path redundancy.
2) No address resynchronization could
take place. Check for existence of original
interface IP address.
Table 4-1. CyberSWITCH 200 Series and 400 Events and Alarms (Continued)
Message in the Event Log
Alarm Manager Probable Cause
Message