Specifications

CyberSWITCH 200 Series and 400 Events and Alarms
Event and Alarm Messages CyberSWITCH Devices (200 Series and 400)
4-14 Management Module Guide
CsEvFormat/Event000d113c
{d “%w- %d %m-, %Y - %T”} - Port
Learning Status is {T LearnState 3}
for the port #{I 2}, located in port
group {I 1} of {m} ({t}). (event [{e}])
CsPCause/Prob000d113c
Port Learn State
This alarm is generated when a port’s
learning is reset. When learning is reset,
all secure addresses on the port will be
deleted and the port will learn source
addresses again.
CsEvFormat/Event000d113d
{d “%w- %d %m-, %Y - %T”} - Network
Learning Mode is {T LearnMode 2} for
the network interface #{I 1} of {m}
({t}). (event [{e}])
CsPCause/Prob000d113d
Network Learn Mode
This alarm is generated when network
learning mode is changed between one-
time learn mode and continuous learn
mode.
CsEvFormat/Event000d113e
{d “%w- %d %m-, %Y - %T”} - Port
Group Learning Mode is {T
LearnMode 2} for the port group #{I 1}
of {m} ({t}). (event [{e}])
CsPCause/Prob000d113e
Port Group Learn Mode
This alarm is generated when a port
group’s learning mode is changed between
one-time learn mode and continuous learn
mode.
CsEvFormat/Event000d113f
{d “%w- %d %m-, %Y - %T”} - Port
Learning Mode is {T LearnMode 3} for
the port #{I 2}, located in port group {I
1} of {m} ({t}). (event [{e}])
CsPCause/Prob000d113f
Port Learn Mode
This alarm is generated when a port’s
learning mode is changed between one-
time learn mode and continuous learn
mode.
CsEvFormat/Event00830000
{d “%w- %d %m-, %Y - %T”} DLM
LostContact trap for Destination
Address {O 1}, Owner Address {O 2}
from {t} device, named {m}. (event
[{e}])
No Probable Cause Message
Table 4-1. CyberSWITCH 200 Series and 400 Events and Alarms (Continued)
Message in the Event Log
Alarm Manager Probable Cause
Message