Specifications

SPECTRUM Software Release Notice (SSRN)
For SPECTRUM 6.5.1
Page 101
Document 0743
Revision 14
June 2002
Extreme Devices
Management Module Information
MM Part Number Device(s) Firmware Version
SM-EXT1000 Extreme Summit switches
BlackDiamond 6808 Core switch
Alpine 3808
Summit 48i
Summit
ExtremeWare 2.1.7
BlackDiamond:
ExtremeWare
3.09b4 and version
5.0 for policy
management
6.1.7
6.1.8
Known Anomalies
Item Description Solution
1 VLAN fault isolation is not supported for
Extreme Summit switches running a
version of ExtremeWare that is earlier
than 6.0.
VLAN fault isolation requires the Extreme
Vlan Stack Table, which is only
supported in version 6.0 or higher. VLAN
information is available via the
ExtrVlanApp model in the Application
view.
2 VLAN information may not be accessible
from the VLAN List menu option in the
Device Topology view.
VLAN information is available from the
ExtrVlanApp model in the Application
view. It is not available from the Device
Topology view because VLAN
information is not supported for Extreme
Summit switches running a version of
ExtremeWare earlier than 6.0.
3 AutoDiscovery connects an Alpine 3808
running firmware 6.1.7 and a Summit
48i running 6.1.8 using Extreme
Discovery Protocol (EDP) but does not
connect them to any non-Extreme
devices.
For connection to non-Extreme devices
from Extreme devices running these
firmware versions, telnet to each device
and enable the dot1d MIBs. Upgrade the
firmware to Extremeware 6.2, because it
uses a proprietary MIB for connectivity.